Owner's Manual

RR2160 MkII Owner’s Manual
Outlaw Audio RR2160
MkII Stereo RetroReceiver
2
Please Read First
Caution: To reduce the risk of electric shock, do not remove the
cover. No user serviceable parts inside. Refer to qualified
personnel.
Warning: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
The lightning flash with arrowhead, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock to
persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating maintenance
(servicing) instructions in the literature accompanying the
appliance.
Warning: Important Safeguards
• Read instructions: All safety and operating instructions
should be read before the unit is operated.
• Retain instructions: The safety and operating instructions
should be retained for future reference.
• Heed warnings: All warnings on the unit and in the operating
instructions should be adhered to.
• Follow instructions: All operating and use instructions
should be followed.
• Water and Moisture: Do not use the unit near water – for
example, near a bath tub, wash bowl, kitchen sink, laundry
tub; in a wet basement; or near a swimming pool.
• Accessories: Do not place the unit on an unstable cart,
stand, tripod, bracket, or table. The unit may fall, causing
serious injury to a child or adult, and serious damage to the
unit.
Any mounting of the unit should follow the
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
• Wall or Ceiling Mounting: The unit should be mounted to a
wall or ceiling only as recommended by the manufacturer.
• Ventilation: Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the unit and
to protect it from overheating, and these openings must not
be blocked or covered. The openings should never be
blocked by placing the unit on a bed, sofa, rug, or other
similar surface. The unit should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided. There should be free space of at least
3 - 6 in. (7.6 - 15.25 cm) and an open
ing behind the unit.
• Heat: The unit should be situated away from heat sources
such as radiators, heat registers, stoves, or other units
(including amplifiers) that produce heat.
• Power Sources: The unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supplied to your home,
consult your unit dealer or local power company.
• Grounding or Polarization: The unit may be equipped with a
polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the
plug. If the plug should still fail to fit, contact a licensed
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
• Power-Cord Protection: Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords where they enter a plug, a convenience
receptacle, and the point where they exit from the unit.
• Lightning: For added protection for the unit during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
any antenna or cable system. This will prevent damage to
the unit due to li
ghting and power-line surges.
• Cleaning: unplug the unit from the wall outlet before
cleaning. The unit should be cleaned only as recommended
by the manufacturer.
• Overloading: Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a risk
of fire or electric shock.
• Object and Liquid Entry: Never push objects of any kind
into the unit through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the unit.
• Servicing: Do not attempt to service the unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all ser
vicing to qualified
service personnel.
• Damage Requiring Service: Unplug the unit from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
When the power supply cord or plug is damaged,
If liquid has been spilled, or objects have fallen into the unit,
If the unit has been exposed to rain or water,
If the unit does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the unit to its normal operation,
If the unit has been dropped or damaged in any way, and
gr
eat care should be exercised in handling, and the unit
should be examined by qualified service personnel,
When the unit exhibits a distinct change in performance (this
indicates a need for service).
•
Replacement Parts: When replacement parts are
required, be sure the replacement parts used have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
IMPORTANT SAFETY NOTE
Before connecting a new component such as the RR2160MkII to your
audio or home theater system it is always good practice to make
certain that all components are turned off, and preferably
unplugged from their AC power source. Many modern electronics
products feature automat
ic turn-on circuits that may be activated
during an installation, causing the potential for damage to
electronic components and/or speakers. Such damage is not
covered by product warranties and Outlaw Audio specifically
disclaims responsibility for any such damage.
Precautions
Verify the Line Voltage
Your new RR2160MkII has been factory configured for 120V (+/- 3%)
AC lines. Connecting the unit to a line voltage other than that for
which it is intended can create a safety and fire hazard, and may
damage the RR2160
MkII. If you have any questions about the voltage
requirements for your specific model, or about the line voltage in
your area, contact Outlaw Audio before plugging the unit into a wall
outl
et.
FCC:This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
ATTENTION: RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR