LFM Series Low Frequency Modules LFM-1 Compact and LFM-2 Owner’s Manual Version 1.
Owner’s Manual Please Read First Please Read First CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside. Refer to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Owner’s Manual LFM Series Low Frequency Modules Table of Contents 2 3 3 3 3 4 4 4 5 5 Please Read First Table of Contents LFM Series Low Frequency Modules Unpacking Accessories Before You Begin Installing Subwoofer Feet LFM Controls and Connections Subwoofers, Bass and Overall System Performance Setup Guide 5 5 7 Connecting to Your System Connecting to a System with a Subwoofer Preamp Output Connecting to a System with no Preamp Outputs 7 Notes On Subwoofer Placement 8 8 9 9 9 9 9 9 10 10 11 11 A
Owner’s Manual Before You Begin Before You Begin Before proceeding with the integration of the LFM into your system, please observe the following precautions and suggestions. ■ ■ ■ ■ ■ ■ Compact Do not plug the power cord into the LFM until all other connections have been made. Always refer to the instructions that came with your receiver or processor for specific procedures, warnings and options. Do not attempt to operate the LFM unless the feet have been properly installed.
Owner’s Manual Setup Guide Subwoofers, Bass and Overall System Performance The goal of an audio system is to recreate the source material as accurately as possible. The components needed to perform this task are an audio source, a receiver or processor/amplifier combination, and speakers. In the era of digital, multi-channel sound, many listeners have chosen to use frequencylimited “satellite” speakers for the front, center and surround channels.
Owner’s Manual Wiring Diagrams Diagram 1: Connecting to a System with a Subwoofer Preamp Output Outlaw Audio
Owner’s Manual Subwoofer Placement 3. Connect one end of the subwoofer cable to the subwoofer or LFE output on the receiver or processor. 4. Locate the connection labeled SUB IN on the rear panel of the subwoofer and connect the other end of the subwoofer cable to that jack. 5. Plug the LFM’s power cord into the input on the LFM Series Subwoofer and connect the plug to an un-switched AC outlet.
Owner’s Manual Setting the LFM’s Controls Setting the LFM’s Controls Variable Crossover By adjusting the variable crossover on the LFM, you can perfectly match your LFM Series Subwoofer to your main speakers. If your receiver or processor already has a built in crossover, disable the crossover on the LFM by flipping the “X-OVER” switch to the “BYPASS” position. Refer to the owner’s manual for your receiver or processor to see how to disable any internal crossover capability it may have.
Owner’s Manual Troubleshooting Care and Maintenance Troubleshooting Cleaning Your Outlaw Model LFM Series Subwoofer is designed for trouble free operation. If you follow the instructions in this manual you should experience many years of high quality listening enjoyment. However, as with any sophisticated electronic device, there may be occasional problems upon initial installation, or during the life of the unit.
Owner’s Manual Specifications Model LFM-1 Compact Specifications Model LFM-2 Specifications Driver Type Down Firing, 10" Long-throw Woofer Driver Type Down Firing, 8" Long-throw Woofer Ports Dual Ports Single Amplifier Power Rating 225WRMS; 1300W peak Amplifier Power Rating 150WRMS; 800W peak Frequency Response 25Hz -180Hz ± 2 dB Frequency Response 25Hz -180Hz ± 2 dB Crossover Type Linkwitz-Reilly 4th Order Low Pass Network Crossover Type Linkwitz-Reilly 4th Order Low Pass Network Cro
Owner’s Manual Outlaw Audio Limited Warranty The Outlaw Audio 30-Day Satisfaction Guarantee This product is guaranteed to satisfy all your needs for a high performance subwoofer system. If for any reason, you are not completely satisfied with it, please contact us at 866-OUTLAWS (688-5297) within 30 days of receipt of the unit and you will receive a return authorization. Please save all of your packing material in that the LFM is heavy and can get damamged in shipping without proper protection.
