MSDS

Material Safety Data Sheet
5 . Fire Fighting Measures
Flammable Properties None known.
Extinguishing Media
Suitable Extinguishing Dry chemical, CO2, water spray or regular foam.
Media
Fire Fighting Notavailable.
Equipment Instructions
6 . Accidental Release Measures
Environmental Precautions Prevent further leakage or spillage if safe to do so.
Methods for Containment Stop leak if you can do so without risk.
Methods for Cleaning Up Collect spill using a vacuum cleaner with a HEPA filter . Avoid the
generation of dusts during clean up . The very fine particles can
cause a fire or explosion; eliminate all ignition sources. Put material
in suitable, covered, labeled containers.
7 . Handling and Storage
Handling Handle and open container with care. Keep formation of
airborne dusts to a minimum.
Storage Store in a cool place in original container and protect from
sunlight. Keep the container dry.
8 . Exposure Controls I Personal Protection
OccupationalExposureLimits
ACGIH
Byproducts Type Value Form
INERT OR NUISANCE DUST (SEQ250) TWA 3.0000 mg/m3 Respirable particles.
10.0000 mg/m3 Inhalable particles.
U.S . - OSHA
Byproducts Type Value Form
INERT OR NUISANCE DUST (SEQ250) PEL 5.0000 mg/m3 Respirable fraction.
15.0000 mg/m3 Total dust.
TWA 5.0000 mg/m3 Respirable fraction.
15.0000 mg/m3 Total dust.
50.0000 mppcf Total dust.
15.0000 mppcf Respirable fraction.
Personal Protective Equipment
Eye / Face Protection Not normally needed.
Skin Protection Not normally needed.
Respiratory Protection No personal respiratory protective equipment normally
required. Use a particulate filter respirator for particulate
concentrations exceeding the Occupational Exposure Limit.
General Hygiene Use good industrial hygiene practices in handling this material.
Considerations
9 . Physical & Chemical Properties
Appearance Powder . Granular.
Color White.
Odor None.
Odor Threshold Notavailable.
Physical State Solid
Material Name: Outpak Slurry Solution / Revision Date: 28-January-2013 Page 2 of 5