User Manual

9.1 Smooth Fading

To add smoothing to intensity

adjustments and remove the ‘choppy’

look of fades, there is an option to add

smoothing to the DMX. This replicates

a traditional tungsten look, with slight

delay on the fader.

Enable this by selecting MENU-

>Advanced->DMX Smooth.

9.2 DMX Scenarios

There are several diﬀerent DMX

modes for diﬀerent applications, from

basic control of intensity and colour

temperature to full access to special

eﬀects functionality over multiple

channels.

Both 8 and 16 bit modes are supported. Please see page 27 for full description

of modes. To enable 16-bit channel resolution, select MENU->Advanced->DMX

16bit To enable eﬀects channels, select MENU->Advanced->DMX Eﬀects

9.3 External Eﬀects Triggering

You can use an external pulse to trigger any eﬀect including Timed Flash and Dual

Level Flash. This essentially gives you a way to remotely access the FLASH button,

and performs the same function as pressing and releasing this button. External

triggering can be enabled by selecting: MENU->Advanced->Triggering-

>External Trigger. When enabled, the text EXT appears in the upper right of the

LCD display.

• The Rising pulse edge triggers the eﬀect, and is the same as pressing the

FLASH button in.

• The Falling pulse edge is the same as releasing the FLASH button.

An input voltage from 5V – 24V can be used for trigger. The input

impedance is 180kΩ

ADVANCED

High Speed

DMX 16 bit

DMX Smooth •

DMX Effects •