User Manual

33
Compliance Notes
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Safety Information
High power LED light is emitted from this product. Do not stare
directly into the beam, permanent eye damage could result
Case can get hot during normal operation. Please take care when
handling unit. Maximum Surface Temperature Tc = 70°C
Power Supply has dangerous voltages inside. Do not open or
expose to moisture
Falling hazard - make sure unit is properly secured and safety chain
attached
Servicing is only to be done by an authorised agent. Sealing can be
compromised by incorrect assembly
The standard Power Supply IS NOT water resistant, please make
sure to keep in a dry location to avoid electric shock
Please make sure discarded electrical waste is properly
recycled to reduce environmental impact. Please use a
separate collection facility or contact the supplier from
which this fixture was purchased.
CS_micro_UG_6PRINT.indd 33 23/01/2018 2:36 PM