Instructions / Assembly

EN
Operating Instructions
BEFORE USING THIS PRODUCT, READ, UNDERSTAND AND FOLLOW
THESE INSTRUCTIONS.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS
 This is a seasonal decoration and is not intended for permanent installation or
year-round use. It is recommended not to use for more than 90 consecutive days.
 Do not attempt to inflate during unusually strong winds. If it becomes too windy for
safe operation, simply allow your inflatable to deflate, secure it, and wait for better
conditions before re-inflating.
 This is an electrical product – not a toy. Keep the product out of the reach of children
to avoid any accidents or electrical shocks.
 Protect the electric fan and power cord from exposure to water. This precaution will
reduce the risk of electrical shocks.
 Do not use anything with this product that is not included in the original
manufacturer’s packaging when purchased.
 Do not expose the product to sharp items, as these may cause rupture and damage.
 The repair of the damaged main connection cable is only allowed for a qualified
technician.
 Do not hang ornaments or other objects.
 Do not close door or window onto the power cord or extension cords, as this may
damage the product’s wire insulation.
 Do not secure the wiring of the product with staples, nails or other sharp objects, or
place wiring on sharp hooks or nails.

When the temperature is below 5° F (-15° C), the motor may temporarily stop running.
The motor will begin functioning again higher temperatures.
WARNING:
This inflatable has a plug that will fit into a polarized outlet only one way.
This is a safety feature. If you are unable to insert the plug into the electrical outlet, try
reversing the plug. If the plug still does not fit, contact a qualified electrician. Never use the
plug with an extension cord unless you can fully insert the plug into the extension cord. Do
not alter the plug. Do not attempt to defeat the safety purpose of the polarized plug
.
To Set Up and Use
Remove contents from packaging.
1. Place inflatable in a clean, open area, free from obstruction or other debris.
2. Roll out fabric and lay out the contents.
3. Plug in the adaptor in the appropriate electric outlet.
4. Turn unit upright. Make sure the air intake of fan is clear of fabric and free of
obstruction.
5. Be sure the zipper is closed in order for figure to fully inflate.
6. To secure the Inflatable from winds, insert a metal stake into the ground through each
of the holes in the lower tabs of the inflatable figure.
7. To deflate, simply unplug from the outlet device and open zipper on back of inflatable.
Do not unplug by pulling on cord.
INbka007