Instructions / Assembly

Care and Maintenance
 Periodically check to ensure there are no holes or tears in the inflatable figure. If you
find any tears in the fabric, you can repair them with needle and regular thread. No
special thread is necessary.
 Only use mild detergent with cold water and damp a soft cloth to wipe clean the
figure.

Periodically unplug the product from the electrical outlet and allow the transformer
and fan to cool to avoid overheating and/or product damage.

Neatly fold and store the product in a cool, dry location that is away from sunlight or
heat sources
.
 Unplug, roll up and store in original package or similar size box.

Do not wipe clean the motor.
Troubleshooting Guide:
Item will not fully inflate.
Ensure the zippers on the back of each inflatable figure are closed.
Inspect fabric for tears and holes; repair if necessary.
Make sure the fan is not obstructed by any debris or snow.
Unplug the fan from the electrical outlet and let cool completely, before
clearing debris.
Fan does not operate.
Ensure the fan is plugged into a working outlet (for indoors, a standard
AC outlet, for outdoors a GFCI outlet).
Fan may be overheated. Unplug the fan from the electrical outlet and let
cool completely.
SAVE THESE INSTRUCTIONS