Phau Ntawv Qhia

OPERATING INSTRUCTIONS FOR LED-IR-DIM

Web: www.outwater.com

Phone: 1-800-631-8375

SUMMARIZATION

The 12-Key Infrared Dimmer is a dedicated intelligent LED lighting dimmer. It uses the most advanced PWM (Pulse

Width Modulation) digital dimming technology. You can manually adjust the brightness. The IR wireless remote

control can also be used for remote dimming. Standards for commercial or home a low 86-type switch socket box

installation. LED dimmer switches can be installed to meet the lighting needs of commercial or residential lighting

environments. To extend the LED lifespan, energy saving; power and low-power LED lighting can be dimmed. Used

to control a variety of LED lighting applications such as point source of light, exible light strips, wall washer lamps,

glass curtain wall lights and more. With a competitive price, easy wiring, and ease of use. Though the infrared remote

control and dimmers on the knob to adjust brightness. Gray level 255; with custom features, delayed shutdown

function and a xed gray scale output.

TECHNICAL PARAMETERS

• Working Temperature: -20-60°C

• Supply Voltage: 5V, 12V~24V (optional) [Specify the required voltage when ordering]

• Output: 1 channel

• Controller Dimension: L 87i x H 87i x H 53mm

• Remote Dimension: L 86i x W 33i x H 7mm

• Packing Size: L 160 x W 95 x H 51mm

• Net Weight: 145g

• Gross Weight: 180g

• Static Power Consumption: < 1W

• Output Current: < 8A

• Output Power: 5V: < 40W | 12V: < 96W | 24V: < 192W

PAGE 1
Web: www.outwater.com Phone: 1-800-631-8375 OPERATING INSTRUCTIONS FOR LED-IR-DIM SUMMARIZATION The 12-Key Infrared Dimmer is a dedicated intelligent LED lighting dimmer. It uses the most advanced PWM (Pulse Width Modulation) digital dimming technology. You can manually adjust the brightness. The IR wireless remote control can also be used for remote dimming. Standards for commercial or home a low 86-type switch socket box installation.
PAGE 2
External Dimension Interface Specifications Directions For Use 1. Connect the load wire first, followed by the power wire. TO ENSURE THAT A SHORT CIRCUIT CAN NOT OCCUR CONNECT THE WIRES BEFORE YOU TURN ON THE POWER. 2. When in use, the remote control should be facing the infrared receiver. Ensure there are no obstructions between the remote and the receiver. When the dimmer receives a signal from the infrared remote control, the red light on the front will flicker.
PAGE 3
a. Infrared remote control adjustment mode. See the below table for the features of each key. Symbol Key Name ON/OFF DELAY OFF 25% Function Turns the unit ON and OFF DELAY OFF Pressing this key will turn the unit OFF automatically after 30 secs. Brightness+ Brightness - Increases and decreases the gray scale. Each press of the key will increase or decrease the gray scale by 2 grades. There are 255 grades in total. HOT KEY Brightness shortcut key.
PAGE 4
Typical Application 2 4