Instructions / Assembly
TROUBLESHOOTING
Burner won’t light
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Propane cylinder is empty Replace propane cylinder
Clear blockage
Turn control knob to ON
Use a full cylinder
Clean reector and burner screen
Check burner and orices for
blockage
Remove blockage and clean burner
inside and outside
Turn cylinder valve OFF and ll the
cylinder
Blockage in orice
Control knob is not in ON position
Gas pressure is low
Control knob fully ON
Dirt or lm on reector and burner screen
Blockage in burner
Outdoor temperature is less than
4.4 ºC/40 ºF and tank is less than 1/4 full
Burner ame is low
Carbon build-up
Thick black smoke
Figure 236, Page 15