OVE INTELLIGENT TOILET Model 735H USER MANUAL Thank you for choosing OVE INTELLIGENT TOILET. Please read and understand this entire manual before attempting to assemble, operate or install this product.
CONTENTS SAFETY NOTICE ..................................................1-2 PART LIST ...............................................................3 INSTALLATION INSTRUCTIONS ............................4 CONTROLS DESCRIPTION ....................................5 USAGE INSTRUCTIONS ......................................6-8 CAUTION NOTES ....................................................9 CLEANING THE FILTER NET ...............................10 DAILY MAINTENANCE ........................................
SAFETY NOTICE ADMONITION ■ Leading causes of electric shock and fire. Inside the product there is an electronic apparatus installed, please do not use it in wet place. Please keep the electronic and electric plug away from water. ■ Preventing sanitation issues Please use water suitable for human consumption ■ Do not disassemble yourself, electric shock, fire and leakage may result. NOTICE ■ Preventing sanitation issues ● Please do not put any aromatizer or cleaning product in the tank.
SAFETY NOTICE USAGE GUIDELINES PLEASE FOLLOW THE FOLLOWING GUIDELINES Do not leave the toilet exposed to the sun. Color fading and yellowing may result. To prevent against power surge damages, make sure the ground is working in the power socket. Direct sunlight affects the good functioning of the remote. Radio or transmitting devices may interfere with the toilet's remote control functions. If you do not plan to use the toilet for a long time, close the inlet water valve and unplug the toilet.
PART LIST K STOP SPRAY MOVE DRYING BIDET MOVE FLUSHING WATER TEMPERATURE NOZZLE FORWARD AIR PUMP AIR TEMPERATURE NOZZLE BACKWARD WATER PRESSURE SEAT TEMPERATURE NOZZLE WASHING WATER PRESSURE L A M Deodorization outlet B Clockwise—turn down Anti-clockwise—turn up J I Power socket Seat sensor C D H F Inlet Valve G E Silicone sealer PART# DESCRIPTION CODE A Seat cover 99TOI0014-OU B Electronic hardware 99TOI0039-OU D Control keypad (English & French) Control keypad (English &
INSTALLATION INSTRUCTIONS INSTALLING THE SMART TOILET WATER AND ELECTRIC SUPPLY INSTALLATION Open inlet valve. Put the plug into the power socket If the blue light is flashing, this indicates that the washing water tank is filling-up. After 2 min, the tank should be full. *While the tank is filling, the user cannot activate any other function of the toilet. POWER ENERGY SAVER LIGHT NOZZLE WASHING After tank is filled full with water, the shimmer indicator light stops blinking and turns off.
CONTROLS DESCRIPTION Bidet cleaning display Drying display Spray cleaning display Self-flushing display Nozzle move forward Water temperature display ● 4 levels: ambiant, low, middle and high level. Nozzle move behind Wind temperature level display ● 4 levels: ambiant, low, middle and high level. Nozzle water pressure level Seat temperature level display ● Pressure level can be ajusted to 8 levels. ● Setting water pressure at "0", water will come out from the side to clean nozzle.
USAGE INSTRUCTIONS KEYPAD CONTROLS ON/OFF Press this button to turn the smart toilet ON and OFF. POWER LIGHT ENERGY SAVER NOZZLE WASHING ENERGY SAVER When ON, the energy saving mode will decrease the electrical usage of the smart toilet when in stand-by. The seat will not be continuously pre-heated. BIDET MOVE DRYING SPRAY MOVE Light STOP Press the light key, the shimmer on the intelligent toilet lights up; press it again, the light turns off.
USAGE INSTRUCTIONS ● All the settings from last usage are kept in memory for the next use. The remote control display will turn off automatically. To wake it up, press any button 1 time. Bidet cleaning display Drying display Spray cleaing display Self-flushing display Nozzle move forward Water temperature display ● 4 levels: ambiant, low, middle and high level. Nozzle move behind Wind temperature level display ● 4 levels: ambiant, low, middle and high level.
USAGE INSTRUCTIONS Automatic deodorization The carbon filter catalyzed automatic deodorization begins when the user sits on the seat. The deodorization stops after 20 seconds of standing up. Deodorizing In addition, the toilet seat is covered with a layer of active anti-microbial material. Anti-microbial Damp fitting This toilet seat has a soft close mechanism preventing noisy closing and opening. *Do not attempt to close or open the cover abruptly, this may damage the soft close mechanism.
CAUTION NOTES ● If no one is sitting on the seat, the water cleaning and drying function are disabled. ● Once the nozzle cleaning session is over, the nozzles will self-clean every time. Sitting sensor in the toilet seat *Do not lean back on the seat cover once you are seated. This will damage the seatcover. ● The nozzle cleaning function will automatically stop after 2 minutes of uninterrupted use. Repress the button to activate again. Automatically stop after 2 minutes.
CLEANING THE NET OF THE FILTER Cleaning the net ● When you notice a decrease in water pressure in the washing nozzles, clean the net and/or change the filter. Always make sure the tap water pressure complies with this toilet’s requirements. How to clean the net 1. Close water inlet valve 2. Screw out the net with the appropriative tool. 3. Clean the dirt with toothbrush or small brush. 4. Re-install and make sure no leakage occurs. 5. If the pressure is still too low, replace the filter.
DAILY MAINTENANCE TOILET MAINTENANCE GUIDELINES The toilet's seat is made of plastic. Please following the below guidelines to prevent damages. Clean with warm water and a soft detergent. Never use abrasive materials or chemicals. Avoid spilling water on top of the electronic components behind the seat cover. ADMONITION Before maintaining, please pull out the power plug. NOTICE Caution Pull out plug Thinner Caution Please keep power socket away from detergent and water.
STORAGE GUIDELINES Never use below freezing ● Always keep the toilet in an environment above 5 C to prevent water freezing and damaging the inner pluming. Extended periods of no usage ● If the toilet is not used for an extended period of time, the water should be drained from the toilet's bowl and the washing water tank. How to empty the toilet's water reserve 1. Close water inlet valve 2. Twist the washing water tank's emptying cap 3.
SPECIAL MAINTENANCE Pulling out the nozzles for manual washing User may pull out the nozzle to wash it by hand 1. Nozzle manual cleaning POWER LIGHT ENERGY SAVER NOZZLE WASHING DRYING SPRAY MOVE STOP ※ While no one is sitting on the seat: Open seat cover, press Nozzle Washin key. The first nozzle will come out to allow for manual cleaning. ※ Press the same key again: The second nozzle will come out. ※ Finally, press the key a 3rd time and the nozzle will go back into place. 2.
COMMON TROUBLESHOOTING MALFUNCTION AND POTENTIAL ROOT CAUSES Problem Nozzle pulls out but no water Solution Cause Press nozzle clean key by mistake Press nozzle or bidet cleaning Inlet hose twisted leads to jam Get rid of the hose twisted Tap water no pressure Confirm tap water have pressure Cleaning water don't spurt out Clean nozzle jammed Wash the spout Filter jammed Replace filter Insufficient water pressure out of the nozzle Inlet net jammed The water temperature is set to ambiant emperat
TECHNICAL SPECIFICATIONS Technical Specifications Item Specification Content AC 120V. 1300W. 60HZ 1.2m insulated power cord Water amount Nozzle cleaning Water amount adjustment 0.4-1.0 L/min (water pressure 0.19Mpa (27.6 psi)) Bidet cleaning Water amount adjustment 0.5-1.0 L/min (water pressure 0.19Mpa (27.
1 YEAR WARRANTY LIMITED 1 YEAR WARRANTY The DISTRIBUTOR warranty is valid for a period of 1 year after purchased. Improper us of this product or any deviation to the general guidance given in the user manual will void the warranty. This non-transferable warranty applies only to the original purchaser and proof of purchase is required for all claims. This warranty applies to the DISTRIBUTOR toilet installed for residential use only.
CONTACT US Save this manual for future reference Conservez ce manuel pour usage ultérieur Conserve este manual para futura referencia HEAD OFFICE / SIÈGE SOCIAL / OFICINA PRINCIPAL 2800 Etienne Lenoir, Laval Quebec H7R 0A3 Canada Customer service / Service à la clientèle / Service al cliente Tel.: 1-866-839-2888 Fax: 1-866-922-9990 customerservice@ovedecors.com 8:00 am - 5:00 pm E.S.
