How to Guide

CAUTION NOTES
9
● If no one is sitting on the seat, the
water cleaning and drying function are
disabled.
*Do not lean back on the seat cover once you
are seated. This will damage the seatcover.
Sitting sensor in
the toilet seat
● Once the nozzle cleaning session is
over, the nozzles will self-clean every
time.
● The nozzle cleaning function will automatically stop
after 2 minutes of uninterrupted use. Repress the
button to activate again.
Automatically stop
after 2 minutes.
● BEWARE: If you stand up during the
nozzle cleaning session, the nozzles
will stop spraying after 2 seconds.
Press the stop button before standing
up.
STOP
● Once you press the drying button, the
toilet will flush itself before the drying
session begins. This will take 10 seconds.
DRYING
● Note that before every nozzle cleaning session, the nozzles will flush the cold water out
and wash themselves. This will take 10 seconds and after, the cleaning session will begin.
Sray / move Bidet / move