How to Guide

INSTALLATION INSTRUCTIONS
4
INSTALLING THE SMART TOILET
WATER AND ELECTRIC SUPPLY INSTALLATION
Open inlet valve.
Put the plug into the
power socket
If the blue light is flashing, this indicates
that the washing water tank is filling-up.
After 2 min, the tank should be full.
*While the tank is filling, the user cannot
activate any other function of the toilet.
After tank is filled full with water,
the shimmer indicator light
stops blinking and turns off.
Toilet ON/OFF
Warming up the toilet
seat takes about 5 min.
NOTICE
1. Leave the power continuously ON to assure all functions are ready for
anytime use.
2. If the toilet is not used for 24h, it will enter in Power Saving Mode.
POWER
LIGHT
DRYING
STOP
ENERGY SAVER
NOZZLE WASHING
BIDET MOVE
SPRAY MOVE