How to Guide

Spray cleaning
Bidet cleaning
Warm wind drying
Stop
Flushing
SPRAY MOVE
BIDET MOVE
DRYIING
STOP
FLUSHING
● Press once while sitting: the Spray nozzle cleaning
session will start and the Remote Control display will
flash.
Press a second time: the Spray nozzle motion cleaning
will start.
● Press once while sitting: the Bidet nozzle cleaning
session will start and the Remote Control display will
flash.
Press a second time: the Bidet nozzle motion cleaning
will start.
● Press the drying key and the warm air drying session
will begin.
● Press the stop button to stop any active function.
● Functions will automatically stop after 2 min of
uninterrupted use.
● Press the flushing button to initiate a flush. Note that
once you sit up from the seat, automatic flushing will
occur.
*After pressing any key on the Remote Control, a beeping sound will be
heard if the signal as effectively reached the toilet.
POWER
LIGHT
DRYING
STOP
ENERGY SAVER
NOZZLE WASHING
BIDET MOVE
SPRAY MOVE
Control keypad
STOP SPRAY MOVE BIDET MOVE DRYING FLUSHING
WATER PRESSURE
AIR PUMP
WATER PRESSURE
WATER TEMPERATURE
AIR TEMPERATURE
SEAT TEMPERATURE
NOZZLE FORWARD
NOZZLE BACKWARD
NOZZLE WASHING
POWER OFF
Remote Control
The button only has
power off function
Bidet cleaning display
Spray cleaing display
Nozzle move forward
Nozzle move behind
Nozzle water pressure level
● Pressure level can be ajusted to 8
levels.
● Setting water pressure at "0", water will
come out from the side to clean nozzle.
Drying display
Self-flushing display
Water temperature display
● 4 levels: ambiant, low, middle and
high level.
Wind temperature level display
Seat temperature level display
● 4 levels: ambiant, low, middle and
high level.
● 4 levels: ambiant, low, middle and
high level.
Remark:
High level
Medium level
Low level
● All the settings from last usage are kept
in memory for the next use. The remote
control display will turn off automatically.
To wake it up, press any button 1 time.
USAGE INSTRUCTIONS
7