ELIN / LENA Smart Toilet An installation video guide can be found on our Youtube channel: https://youtu.be/oyErveEZhhw Flush / Chasse / Descarga 1.28 gal 4.
CONTENT SAFETY NOTICE ............................................................................................. p.3 WARNINGS ...................................................................................................... p.4 PART LIST ........................................................................................................ p.5 INSTALLATION INSTRUCTIONS ................................................................. p.6-8 BATTERY INSTALLATION .....................................
SAFETY NOTICE ATTENTION! BEFORE INSTALLING THE PRODUCT, YOU MUST READ AND UNDERSTAND CAREFULLY ALL BELOW WARNINGS. 1. It is forbidden to disassemble toilet by yourself. 2. Please do not set this product in a wet place, because it is an electronic product. If set in the bathroom, please insure that there is proper air flow. 3. Please insure that the product is set more than 0.6 meter away from the bathtub. 4. Please make sure electric power is AC 120V.
WARNINGS Do not leave the toilet exposed to the sun. May cause yellowing or color fading. To prevent against power surge damages, make sure the ground is working in the power socket. Direct sunlight affects the good functioning of the remote. Radio or transmitting devices may interfere with the toilet’s remote control functions If you do not plan to use the toilet for a long time, close the inlet water valve and unplug the toilet.
PART LIST G A Clockwise - Lower flow Anti-cloclwise - Higher flow H I B M J C D K F O N E L Item Qty # A Light Indicator Panel 1 99TOI0234-OU B Water Inlet 1 -- C Side Control Panel 1 99TOI0235-OU D Water Supply Hose 1 99TOI0118OU E Water Filter 1 99TOI0322-OU F Inlet Fitting & Valve 1 99TOI0323-OU G Smart Seat (incl. electronics, cover, seat and lid) Smart Seat (incl.
1 INSTALLATION INSTRUCTIONS 2 B A Remove the seat from the ceramic base. Simply pull the seat up gently. Be careful, there are wires that need to be disconnected before you can remove the seat completely (see step #2). Unplug the electrical cord and the water tube before completely pulling away the toilet seat. 2A 2B 3 2 1 Unplug the cord. 3 To unplug the water tube: 1) Remove the blue clip. 2) Push the ring down with your fingernail.
5 INSTALLATION INSTRUCTIONS 6 Position the toilet on the floor drain, making sure the fixing bolts are aligned with the toilet’s holes. Insert the ring gasket under the toilet. 7 8 Using a ratchet, tightly screw the nut to the fixing bolts. Reconnect the electrical cord. Make sure both ends are well aligned. 9 10 1 2 Reconnect the water tube: 1) Gently, but firmly push the tube inside the hole. 2) Re-insert the blue clip. With care, re-install the seat on the ceramic base.
INSTALLATION INSTRUCTIONS 11 Connect the water inlet fitting to the water supply. 12 Connect the toilet’s water inlet with the supplied water supply hose. 13 24h Apply silicone around the base of the toilet. Wait for 24h for it to dry. p.
BATTERY INSTALLATION BATTERY USAGE SAFETY GUIDELINES 1. Always purchase the correct size and grade of battery most suitable for the intended use. 2. Clean the battery contacts and also those of the device prior to battery installation. 3. Remove batteries from equipment which is not to be used for an extended period of time. 4. Remove batteries if consumed or if product is to be left unused for a long time. 5. Do not mix old and new batteries. 6.
FIRST TIME USE 1 Open the water supply inlet valve. 2 Plug the toilet in the power socket. 3 The toilet’s blue light will start blinking. The blinking light indicates that the wash tank is filling with water, a sensor in the toilet will stop the filling process automatically after around 3 minutes when the tank is full of water. After the wash tank is filled with water, the indicator light will stop blinking. 4 The toilet will turn ON automatically.
CONTROLS DESCRIPTION POWER/ECO: Press 1 time, it will turn the toilet ON. Press 2 times, it will activate the ECO MODE. Press 3 times, it will turn the toilet OFF. STOP: Pressing this button will stop any ongoing function. LADY BIDET/MOVE: Pressing this button will initiate the Back-&-Forth Lady Bidet Cleaning function. Press it again to change to the Static Bidet Cleaning function. After 20 seconds of use, the Air Drying function will start automatically.
CONTROLS DESCRIPTION REAR BIDET/MOVE: Pressing this button will initiate the Static Rear Bidet Cleaning function. Press it again to change to the Back-&-Forth Rear Bidet Cleaning function. *The REAR BIDET refers the 1 water jet function of the nozzle. LADY BIDET/MOVE: Pressing this button will initiate the Static Lady Bidet Cleaning function. Press it again to change to the Back-&-Forth Lady Bidet Cleaning function. *The LADY BIDET refers the 4 water jets function of the nozzle.
CONTROLS DESCRIPTION SEAT TEMPERATURE: Pressing on this button will cycle through the 4 possible temperatures settings for the seat heating. 4 settings: Room temp / Low / Medium / High AIR TEMP: Pressing this button will cycle through the 4 possible temperatures settings for the air drying function. 4 settings: Room temp / Low / Medium / High LIGHT: Pressing this button will turn the toilet bowl’s light ON / OFF. STOP: Pressing this button will stop any ongoing function.
FEATURES REAR BIDET CLEANING (1 WATER JET) This function will only work if the user is sitting on the toilet. Press the REAR BIDET/ MOVE button for a rear bidet cleaning. Water will spray and clean the user. Press the button again and the nozzle will move back & forth to insure the cleanest result. You can use this key stoke to get the best cleaning effect. LADY BIDET CLEANING (4 JETS OF WATER) This function will only work if the user is sitting on the toilet.
INTELLIGENT FEATURES ECO MODE ECO MODE will cut down the electricity usage of your intelligent toilet during times of none-usage. The cleaning water tank will start heating the water only once the user is sitting on the toilet, whereas in normal mode, the cleaning water is kept to your preferences for your instant enjoyment. SOFT CLOSE DESIGN The toilet seat and seat cover have a soundless soft close design that prevents them from falling rapidly and denting or scratching the toilet.
CLEANING THE FILTER Close the inlet valve, turn clockwise. Do not take out the filter before closing the inlet valve. 2 Unscrew the cap of the inlet valve. Clean the filter. Use a tooth brush to clean the dirt on the filter. Use a cloth to clean the dirt and deposits in the valve. 4 Install the filter back into the inlet valve, and screw the cap back on. 1 3 Use water instead of detergent. Do not overexert the filter while cleaning, do not damage the shape of the filter.
LONG TERM STORAGE In order to prevent from any damages that may be caused from frozen toilet water, please drain away the remaining water according to the following methods. When leaving for a long time without using this toilet, please make sure to drain all the water from the toilet. 1. Close water inlet valve. 2. Unfasten and remove the water drain bolt. 3. After draining all the water, please tightly screw the water drain bolt back into place. 4.
SPECIFICATION SHEET Item Electric Load Electric Cord Content AC 120V / 1300W / 60HZ 1.5 m insulated power cord Cleaning System Rear Bidet (1 jet) Lady Bidet (4 jets) Water Temp Heater Capacity Cleaning Tank Capacity Overheating Safety Anti-Reflux Adjustable pressure Adjustable pressure 4 Levels AC 120V / 1200W / 60HZ 0.3 L Temperature safety reset protector integrated. Toilet will shutdown if temp. is out of specs. Anti-Reflux check valve integrated.
MAINTENANCE & CONSUMER RESPONSIBILITIES ■■ The DISTRIBUTOR does prohibits the use of harsh abrasive cleansers on any of its products. Harsh cleansers will damage the inner workings of the toilets. ■■ For daily maintenance, use a wet cloth and a soft liquid cleaner. ■■ Never use abrasives or cleaners containing acetone, chlorine or strong bleach, scrapers, metallic brushes, nor other objects or products which can graze or tarnish surfaces.
INSTALLATION PICTURE p.
Save this manual for future reference Conservez ce manuel pour usage ultérieur Conserve este manual para futura referencia HEAD OFFICE / SIÈGE SOCIAL / OFICINA PRINCIPAL 2800 Etienne Lenoir, Laval Quebec H7R 0A3 Canada Customer service / Service à la clientèle / Service al cliente Tel.: 1-866-839-2888 Fax: 1-866-922-9990 8:00 am - 5:00 pm E.S.
