VOVO INSTALLATION MANUAL | MANUEL D’INSTALLATION | MANUAL DE INSTALACIÓN Flush | Chasse | Descarga 1.28 gal | 4.
TABLE OF CONTENT TABLE DES MATIÈRES TABLA DE CONTENIDOS TABLE OF CONTENT.........................................2 TABLE DES MATIÈRES......................................2 TABLA DE CONTENIDOS...................................2 SAFETY INFORMATION.....................................3 INFORMATION SUR LA SÉCURITÉ...................3 INFORMACIÓN DE SEGURIDAD.......................3 POWER OUTLET.................................................4 PRISE DE COURANT..........................................
SAFETY INFORMATION (continued) INFORMATION SUR LA SÉCURITÉ (suite) INFORMACIÓN DE SEGURIDAD (continuado) CAUTION 1. Do not disassemble toilet by yourself. 2. Ensure that there is proper air flow in the room to avoid humidity buildups. 3. Ensure that the product is set more than 0.6 meter away from the bathtub. 4. Ensure electric power is AC 120V. 5. Ensure the electrical socket can bare a load of 1800W power (or else it can cause fire or electrical shock). 6. Ensure the electrical source is well grounded.
SAFETY INFORMATION (continued) INFORMATION SUR LA SÉCURITÉ (suite) INFORMACIÓN DE SEGURIDAD (continuado) CAUTION 10. Keep any flame or flammable products away from the toilet. 11. Do not step on the toilet seat, the seat cover, the ceramic body, or put anything heavy on the product. Otherwise, the product may break and may cause injury or the product may break and may cause indoor flooding. 12. Do not put your finger or anything else into the outlet of the drying blower. 13.
PART LIST LISTE DES PIÈCES LISTA DE PIEZAS G A H M I B J C D K N F L T E O P Q R S TOOLS REQUIRED (not supplied) OUTILS REQUIS (non fournis) HERRAMIENTAS NECESARIAS (no incluido) 7/8 SUPPLY LINE OPTIONAL HOSE 7/8 OPTIONNELLE MANGUERA 7/8 OPCIONAL PAGE 5
PART LIST LISTE DES PIÈCES LISTA DE PIEZAS PART # # DE PIÈCE PARTE # DESCRIPTION DESCRIPTION DESCRIPCIÓN QUANTITY QUANTITÉ CANTIDAD CODE CODE CÓDIO A Light Indicator Panel Panneau Indicateur Lumineux Panel indicador de luz 1 -- B Electric Flush Valve Vanne de chasse d’eau électrique Válvula de descarga eléctrica 1 99TOI0371-OU C Side Control Panel Clavier de contrôle Panel de control lateral 1 -- D Water Supply Hose type 3/4-G (pre-installed) Tuyau flexible type 3/4-G (Pre-installé) Manguer
INSTALLATION INSTALLATION INSTALACIÓN 1 1.1- Remove the seat from the ceramic base. Simply pull the seat up gently. Be careful, there are supply lines that need to be disconnected before you can remove the seat completely (see step 1.2). 1.2- Unplug the 3 supply lines before completely pulling away the toilet seat. 1.3- Install the toilet flange according to the manufacturer’s recommendations. 1.4- Position correctly the two fixing bolts of the toilet flange. Follow manufacturer’s recommendations. 1.
2 INSTALLATION INSTALLATION INSTALACIÓN 2.1- Insert the wax ring gasket under the toilet. 2.2- Position the toilet on the flange, making sure the fixing bolts are aligned with the toilet’s holes. 2.3- Using a ratchet, tightly screw the nut to the fixing bolts. 2.4- Reconnect 2 of the supply lines. With care, re-install the seat on the ceramic base. Make sure no supply line get squeezed or tangled. 2.1- Insérez le joint d’étanchéité en-dessous de la toilette. 2.
3 INSTALLATION OPTION#1: FOR INSTALLATION TO A 1/2” WATER OUTLET PIPE OPTION D’INSTALLATION N° 1 : POUR UNE INSTALLATION SUR UN TUYAU DE SORTIE D’EAU DE 1/2 OPCIÓN DE INSTALACIÓN #1: PARA LA INSTALACIÓN EN UN TUBO DE SALIDA DE AGUA DE 1/2” N G INSTALLATION TO A 1/2 NPT THREADED WATER OUTLET PIPE It is recommended to install the smart toilet with the supplied 1/2” to 3/4” shut-off valve for best performances at low water pressure.
4 INSTALLATION OPTION#1: FOR INSTALLATION TO A 1/2” WATER OUTLET PIPE OPTION D’INSTALLATION N° 1 : POUR UNE INSTALLATION SUR UN TUYAU DE SORTIE D’EAU DE 1/2 OPCIÓN DE INSTALACIÓN #1: PARA LA INSTALACIÓN EN UN TUBO DE SALIDA DE AGUA DE 1/2” 4.1- When connecting the fittings, it is important to properly seal all connections. Pipe Thread Sealant, also known as Pipe Dope is the best option for sealing, but Teflon Tape can also be used.
5 INSTALLATION OPTION#1: FOR INSTALLATION TO A 1/2” WATER OUTLET PIPE OPTION D’INSTALLATION N° 1 : POUR UNE INSTALLATION SUR UN TUYAU DE SORTIE D’EAU DE 1/2 OPCIÓN DE INSTALACIÓN #1: PARA LA INSTALACIÓN EN UN TUBO DE SALIDA DE AGUA DE 1/2” 5.1- Insert the Reducing Valve (O) as shown. Reconnect the Water Supply Hose (D) to toilet and tighten the nut. NOTE: Install the Reducing Valve (O) at the back of the toilet.
6 INSTALLATION OPTION#2: FOR INSTALLATION TO A 3/8” SHUT-OFF VALVE OPTION D’INSTALLATION N° 2 : POUR L’INSTALLATION SUR UNE VANNE D’ARRÊT DE 3/8 OPCIÓN DE INSTALACIÓN #2: PARA LA INSTALACIÓN A UNA VÁLVULA DE CIERRE DE 3/8” INSTALLATION TO A PRE-EXISTING 3/8”COMPRESSION SHUT OFF VALVE It is recommended to install the smart toilet with the supplied 1/2” to 3/4” shut-off valve for best performances at low water pressure.
7 INSTALLATION OPTION#2: FOR INSTALLATION TO A 3/8” SHUT-OFF VALVE OPTION D’INSTALLATION N° 2 : POUR L’INSTALLATION SUR UNE VANNE D’ARRÊT DE 3/8 OPCIÓN DE INSTALACIÓN #2: PARA LA INSTALACIÓN A UNA VÁLVULA DE CIERRE DE 3/8” 7.1- Change the pre-installed O-ring on the Check Valve (P) to the Large Size O-ring (Q). 7.2- Insert the Check Valve (P) into toilet water inlet as shown. It is critical to ensure the arrow of the Check Valve (P) points upward or else water will not flow. 7.
8 INSTALLATION OPTION#2: FOR INSTALLATION TO A 3/8” SHUT-OFF VALVE OPTION D’INSTALLATION N° 2 : POUR L’INSTALLATION SUR UNE VANNE D’ARRÊT DE 3/8” OPCIÓN DE INSTALACIÓN #2: PARA LA INSTALACIÓN A UNA VÁLVULA DE CIERRE DE 3/8” 8.1- Connect the 7/8”Ballcock Female end of the water supply line (not supplied) to the 7/8”Ballcock Male end of the Bushing Adapter (R). Connect the 3/8” Compression Female end of the supply line to the 3/8” Compression Male end of the shut off valve (not supplied).
BATTERY USAGE SAFETY GUIDELINES CONSIGNES DE SÉCURITÉ POUR L’UTILISATION DE LA BATTERIE PAUTAS DE SEGURIDAD PARA EL USO DE LA BATERÍA • • • • • • • Always purchase the correct size and grade of battery most suitable for the intended use. Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Remove batteries if consumed or if product is to be left unused for a long time.
10 BATTERIES INSTALLATION INSTALLATION DES PILES INSTALACIÓN DE BATERÍAS In order to make sure the flushing can work in the event of a power shortage, install a durable battery inside that will power the flush valves in such events. 10.1- Remove the screw cap from the cover. 10.2- Open the battery cover using a screwdriver. 10.3- Open the battery cap and securely put the battery in place, as shown on the drawing. 10.4- Put back the cap and close the battery cover.
FIRST TIME USE GUIDELINES DIRECTIVES D’UTILISATION POUR LA PREMIÈRE FOIS PAUTAS PARA EL USO POR PRIMERA VEZ 11 11.1- Open the water supply inlet valve. 11.2- Plug the toilet in the power socket. 11.3- The toilet’s blue light will start blinking. The blinking light indicates that the wash tank is filling with water, a sensor in the toilet will stop the filling process automatically after around 1 minutes when the tank is full of water.
12 REMOTE CONTROL PAIRING COUPLAGE À DISTANCE EMPAREJAMIENTO DEL MANDO A DISTANCIA NOTICE: To ensure good function, the remote has to be paired to the toilet after the first start-up. 12.1- Ensure the toilet is powered off (press the POWER button on the side keypad of the toilet once or twice so tha the LED Light Indicator turns off). Then, press for 3 seconds on the STOP button on the side keypad. The toilet will emit a beeping sound. 12.
13 SIDE KEYPAD CONTROLS DESCRIPTION DESCRIPTION DES COMMANDES DU CLAVIER LATÉRAL DESCRIPCIÓN DE LOS CONTROLES DEL TECLADO LATERAL POWER: Press 1 time, it will turn the toilet ON. Press 2 times, it will turn the toilet OFF. MARCHE: Appuyer 1 fois, la toilette se met en marche. Appuyer 2 fois, la toilette s’arrête. ENCENDIDO: Presione 1 vez, se encenderá el inodoro. Presione 2 veces, se apagará el inodoro. STOP: Pressing this button will stop any ongoing function.
14 LIGHT INDICATOR PANEL DESCRIPTION DESCRIPTION DU PANNEAU INDICATEUR LUMINEUX DESCRIPCIÓN DEL PANEL INDICADOR DE LUZ POWER INDICATOR: The light will turn RED when the toilet is powered ON. The light will turn off when the toilet is powered OFF. INDICATEUR DE LA MISE EN MARCHE: Lors de la mise en marche, la lumière devient rouge. La lumière s’éteint lorsqu’on procède à la mise en Arrêt de la toilette. INDICADOR DE ENCENDIDO: La luz se volverá de color ROJO cuando el inodoro está encendido [ON].
15 REMOTE CONTROL DESCRIPTION DESCRIPTION DE LA TÉLÉCOMMANDE DESCRIPCIÓN DEL MANDO A DISTANCIA REAR BIDET/MOVE: Pressing this button will initiate the Static Rear Bidet Cleaning function. Press it again to change to the Back-&-Forth Rear Bidet Cleaning function. *The REAR BIDET refers the 1 water jet function of the nozzle. BIDET ARRIÈRE/DÉPLACEMENT: En appuyant sur ce bouton, la fonction de nettoyage statique du Bidet arrière est activée.
16 REMOTE CONTROL DESCRIPTION DESCRIPTION DE LA TÉLÉCOMMANDE DESCRIPCIÓN DEL MANDO A DISTANCIA WATER PRESSURE DOWN: Pressing this button during the Static or the Back-&-Forth Bidet cleaning will decrease the water jet pressure. 5 settings: 5 increments from high to low. PRESSION DE L’EAU EN BAISSE: Appuyez sur ce bouton pendant le nettoyage Statique ou Back-&-Forth Bidet pour diminuer la pression du jet d’eau. 5 réglages: 5 incréments d’élevé à faible.
17 REMOTE CONTROL DESCRIPTION DESCRIPTION DE LA TÉLÉCOMMANDE DESCRIPCIÓN DEL MANDO A DISTANCIA AIR TEMPERATURE BUTTON & INDICATOR: Pressing this button will cycle through the 4 possible temperatures settings for the air drying function. LIGHT OFF = Room temp / GREEN = Low / ORANGE = Medium / RED = High BOUTON ET INDICATEUR DE TEMPÉRATURE DE L’AIR : En appuyant sur ce bouton, vous obtenez 4 réglages de températures possible pour la fonction SÉCHAGE.
18 AUDIO SIGNALS SIGNAUX AUDIO SEÑALES DE AUDIO BEEPING SOUNDS DIRECTIONS 1X BEEP = The toilet will give out one beeping sound every time it successfully receives a command from the Remote Control. 2x BEEP = The toilet will give out two beeping sounds every time it has successfully received a command, but cannot execute it. The toilet might not be able to execute a given command because the function is currently unavailable, or because a given function has reached its maximum or minimum setting.
FEATURES CARACTÉRISTIQUES CARACTERÍSTICAS 19 REAR BIDET CLEANING (1 WATER JET) This function will only work if the user is sitting on the toilet. Press the REAR BIDET/MOVE button for a rear bidet cleaning. Water will spray and clean the user. Press the button again and the nozzle will move back & forth to insure the cleanest result. You can use this key feature to get the best cleaning effect.
20 FEATURES CARACTÉRISTIQUES CARACTERÍSTICAS AIR DRYING This function will only work if the user is sitting on the toilet. Press the DRYING button for air drying. The air will dry the user. Press the button again and the air nozzle will move back & forth to insure driest result. You can use this key feature to get the best drying effect. SÉCHAGE À AIR CHAUD Cette fonction se met en marche uniquement lorsque l’usager est assis. Appuyez sur le bouton SÉCHAGE et la séance séchage à air chaud débutera.
21 CLEANING THE SHUT-OFF VALVE WATER FILTER NETTOYAGE DU FILTRE À EAU POUR VANNE D’ARRÊT LIMPIEZA DEL FILTRO DE AGUA DE VÁLVULA DE CIERRE 21.1- Close the shut-off valve, turn clockwise. Do not take out the filter before closing the shut-off valve. 21.2- Unscrew the cap of the shut-off valve. 21.3- Clean the filter. Use a tooth brush to clean the dirt on the filter. Use a cloth to clean the dirt and deposits in the valve. Use water instead of detergent.
22 CLEANING THE BUSHING FILTER NETTOYAGE DU FILTRE POUR RACCORD LIMPIEZA DEL FILTRO POR ACOPLAMIENTO 22.5- Close the shut off valve. Unscrew and remove the water supply line. Unscrew and remove the 7/8”Ballcock to 3/4”G Bushing Adapter (R). 22.6- The Bushing Filter (S) is located inside the 7/8”Ballcock to 3/4”G Bushing Adapter (R). Gently remove it and gently brush with a toothbrush or similar tool to remove any residue. Place the filter back into the bushing. 22.
LONG TERM STORAGE ENTREPOSAGE À LONG TERME ALMACENAMIENTO PROLONGADO 23 NOTICE: When leaving for a long time without using this toilet, ensure to drain all the water from the toilet. 23.1- Close shut-off valve. 23.2- Unscrew the water drain plug. 23.3- After draining all of the water, tightly screw the water drain plug back into place. AVIS : Lorsque vous partez pour une longue période sans utiliser ces toilettes, assurez-vous de vidanger toute l’eau des toilettes. 23.1- Fermer le robinet d’arrêt. 23.
SPECIFICATION SHEET FEUILLE DE SPÉCIFICATIONS GARANTÍA LIMITADA DEL PRODUCTO Item Electric Load Electric Cord Cleaning System Rear Bidet (1 jet) Lady Bidet (5 jets) Water Temp Heater Capacity Bidet Tank Capacity Overheating Safety Anti-Reflux Drying System Drying Air Temp Air Speed Heater Capacity Overheating Safety Heating Seat Seat Temp Heater Capacity Overheating Safety Deodorization System Deodorizer Limitations Water Supply Pressure Water Supply Temp Ambiant Temp AC 120V / 1300W / 60HZ 1.
MAINTENANCE AND CARE For general cleaning, use mild, nonabrasive soap and warm water. Do not use abrasive cleaners (such cleaners contain sand or silica that will scratch the ceramic finish). Common bowl cleaners may be used on the ceramic surface. Do not use “in-tank” bowl cleaners because they contain corrosive chemicals that attack the tank’s components. LIMITED PRODUCT WARRANTY Warranty Period (from date of sale to first retail purchaser): 1 year on electric / electronic components, and fittings.
ENTRETIEN ET NETTOYAGE Pour le nettoyage général, utiliser un savon doux, non abrasif et de l’eau tiède. Ne pas utiliser de nettoyants abrasifs (tels les nettoyants contenant du sable ou de la silice qui rayeront la surface en porcelaine). Les nettoyants de toilette ordinaires peuvent être utilisés sur la surface de la cuvette en porcelaine. Ne pas utiliser de nettoyants placés à l’intérieur du réservoir, car ils peuvent contenir des produits chimiques agressifs qui attaquent les composants du réservoir.
MANTENIMIENTO Y CUIDADO Para limpieza general, utilice un detergente suave no abrasivo y agua tibia. No utilice limpiadores abrasivos (esos limpiadores contienen arena y sílice que rayarán el acabado de cerámica). Los limpiadores corrientes de taza de baño pueden ser usados en la taza de baño. No utilice limpiadores de taza colocados “dentro del tanque” porque contienen químicos corrosivos que atacan los componentes del tanque.
