Installation Guide

p. 10
CONTROLS DESCRIPTION
POWER indicator:
The light will turn RED
when the toilet is powered
ON.
The light will turn off when
the toilet is powered OFF.
ECO MODE indicator:
The light will turn GREEN
when the ECO MODE is
active.
The light will turn off when
the ECO MODE is not
active.
WATER HEATING
indicator:
The light will turn RED
when the water heating is
active.
The light will turn RED
when the water heating is
not active.
SEAT HEATING
indicator:
The light will turn RED
when the seat heating is
active.
The light will turn RED
when the seat heating is
not active.
SEAT SENSOR
indicator:
The light will turn RED
when the Seat Sensor is
active.
The light will turn off when
the Seat Sensor is not
active.
BEEPING SOUNDS DIRECTIONS
LONG BEEPING = The toilet will give out one LONG beeping sound every time it SUCCESSFULLY receives a command.
SHORT BEEPING = The toilet will give out one SHORT beeping sound every time it UNSUCCESSFULLY receives a
command.
POWER:
Pressing this key will stop any ongoing function.
Pressing for 3 seconds will turn the power ON / OFF.
SPRAY/MOVE:
Pressing this key will initiate the Static Spray Cleaning function.
Press it again to change to the Back-&-Forth Spray Cleaning function.
*The SPRAY refers the 1 water jet function of the nozzle.
DRYING:
Pressing this key will initiate the Static Air Drying function.
While not seated on the toilet, pressing this key for 5 sec. will turn the AUTOMATIC
DRYING function ON/OFF.
BIDET/MOVE:
Pressing this key will initiate the Static Bidet Cleaning function.
Press it again to change to the Back-&-Forth Bidet Cleaning function.
*The Bidet refers the 4 water jets function of the nozzle.
SIDE CONTROL PANEL
SEAT
SENSOR
POWER ECO MODE
WATER
TEMP
SEAT
TEMP
LIGHT INDICATOR PANEL