Installation Guide
p. 7
Using a ratchet, tightly screw the nuts to the xing bolts.
With care, remove the whole tank and the seat from the ceramic base.
Gently set it aside on a soft surface.
Install the washers and nuts onto the two xing bolts of the oor ange.
Position the toilet onto the oor ange, making sure the xing bolts are
aligned with the toilet’s holes.
Place the seal ring under the toilet.
8
9 10
INSTALLATION INSTRUCTIONS
With care, re-install the tank and the seat onto the ceramic base.
11 12
7 (optional)