Installation Guide

THE TOILET’S FUNCTIONS WILL NOT WORK UNLESS YOU ARE ACTUALLY
SITTING ON IT!
NEVER PULL OR PUSH THE BIDET NOZZLE WITH YOUR HAND! THIS WILL
BREAK THE CIRCUITRY!
THE SEAT OPENS AUTOMATICALLY THANKS TO A GEAR SYSTEM,
THEREFORE, WHEN OPENING THE SEAT BY HAND, DO IT GENTLY!
FIRST TIME USE
1
Open the water supply shut o valve.
Plug the toilet in the power socket.
2
The toilet will turn ON automatically. The toilet’s lights will start blinking from left to right circularly.
The toilet will give out one short beeping sound when the lights blinking has complete 1 cycle.
The blinking light indicates that the bidet water tank is lling with water, the toilet seat and the
cleaning water are warming up. A sensor in the toilet will stop the lling process automatically after
approx. 30 seconds when the tank is full of water.
3
Once the beeping sounds and the ashing light have stopped, the toilet is ready for use.
4
Notice:
• Warming up the toilet seat and the bidet water tank will take about 5 minutes.
• Leave the power continuously ON to assure all functions are ready for anytime use.
• If the toilet is not used for 5 days, it will drain and power o automatically.
2
4
3
1
WATCH OUR YOUTUBE INSTALLATION VIDEO
https://youtu.be/Fitsmm5qjcM