Installation Guide

13
1. Cut the decorative track (L) to match the wall to wall distance.
2. Add some silicone to the bottom of the decorative track (L).
3-4. Install the decorative track (L) onto the tub at the marked locations of the wall tracks.
5. Fix the track (L) with some tape to keep it in place during drying.
6. Position the door guide (M) at the center of the track (L), then mark the hole of the guide (M) on the tub.
7 Remove the guide (M) and drill a pilot hole at the marked location using ø1/8” (3mm) drill bit.
8. Fix the guide (M) using provided screw and cap.
DECORATIVE TRACK AND GUIDE INSTALLATION
Helpful Hint
Add a drop of
silicone in the
holes before
inserting the
screws
ø1/8”
3mm
3
4
5
6
7
K
M
M
Inside shower
Outside shower
2
3
L
L
1
WALL TO WALL
DISTANCE
L