CALERO SMART TOILET SEAT 20-1/8” [510] 5-3/4” [145] 20-1/8” [510] 15” [380] 19-3/4” [503] 14-5/8” [370] 7-1/2” [190] 11-1/2” [291] 4-1/2” [115] 6-3/4” [170] 7-5/8” [195] 15” [380] 7-1/4” [185] 2-1/8” [55] Measures: inch [millimeter] INSTALLATION MANUAL • Carefully read the instructions before starting the installation. • This smart toilet seat should be installed by an experienced plumber.
CONTENT SAFETY NOTICE ............................................................................................. p.3 WARNINGS ...................................................................................................... p.4 PART LIST ........................................................................................................ p.5 TOILET SEAT COMPATIBILITY........................................................................ p.6 INSTALLATION INSTRUCTIONS ............................
SAFETY NOTICE ATTENTION! BEFORE INSTALLING THE PRODUCT, YOU MUST READ AND UNDERSTAND CAREFULLY ALL BELOW WARNINGS. 1. It is forbidden to disassemble toilet by yourself. 2. Please do not set this product in a wet place, because it is an electronic product. If set in the bathroom, please insure that there is proper air flow. 3. Please insure that the product is set more than 0.6 meter away from the bathtub. 4. Please make sure electric power is AC 120V.
WARNINGS Do not leave the toilet exposed to the sun. May cause yellowing or color fading. To prevent against power surge damages, make sure the ground is working in the power socket. Direct sunlight affects the good functioning of the remote. Radio or transmitting devices may interfere with the toilet’s remote control functions If you do not plan to use the toilet for a long time, close the inlet water valve and unplug the toilet.
PART LIST G O M I A C H J N E B Q K P D F L Item Qty A Light Indicator Panel 1 B Water Inlet 1 C Side Control Panel 1 D Seat Water Tube 1 E Water Filter 1 F Inlet Valve (not supplied) 1 G Smart Seat (incl. electronics, cover, seat and lid) Smart Seat (incl.
1 TOILET SEAT COMPATIBILITY TO ENSURE THAT THE SMART SEAT IS COMPATIBLE WITH YOUR EXISTING TOILET BOWL: B) Ensure that there is a clearance of at least “B” between the center of the seat installation holes and the front of the flush tank. C 17-1/8~ 18-1/2” [435~470] C) Ensure that the distance between the center of the seat installation holes and the front edge of the toilet bowl is in the range given by “C”.
1 INSTALLATION INSTRUCTIONS 2 1. Turn off the water inlet valve before starting the installation of the smart toilet seat. 2. Only plug the smart seat to the electrical socket once the installation is completely finished. 3 Loosely install the mounting plate with the plastic anchors, washers, and guides provided. 4 1 19-11/16” [500] 2 Before tightening the mounting plate, ensure that the distance between the back of plate and front edge of the toilet bowl is set to 19-11/16” (500mm).
6 INSTALLATION INSTRUCTIONS Turn off the inlet valve, and unscrew the supply hose from the toilet. 8 Screw the Tee joint to the toilet water inlet coupling. 7 Screw the water supply hose to the Tee joint. Note that the filter is located in the reducer. 9 Connect the water tube to the smart seat. This is a pressure snap-in system, gently but firmly push the tube inside the hole. p.
FIRST TIME USE 1 Open the water supply inlet valve. 2 Plug the toilet in the power socket. 3 The toilet’s blue light will start blinking. The blinking light indicates that the wash tank is filling with water, a sensor in the toilet will stop the filling process automatically after around 3 minutes when the tank is full of water. After the wash tank is filled with water, the indicator light will stop blinking. 4 The toilet will turn ON automatically.
CONTROLS DESCRIPTION POWER/ECO: Press 1 time, it will turn the toilet ON. Press 2 times, it will activate the ECO MODE. Press 3 times, it will turn the toilet OFF. REAR BIDET/MOVE & MANUAL NOZZLE WASH: Pressing this button will initiate the Static Rear Bidet Cleaning function. Press it again to change to the Back-&-Forth Rear Bidet Cleaning function. Pressing this button for 3 second until the toilet beeps. The toilet will initiate the Back-&-Forth Rear Bidet Cleaning function.
CONTROLS DESCRIPTION REAR BIDET/MOVE: Pressing this button will initiate the Static Rear Bidet Cleaning function. Press it again to change to the Back-&-Forth Rear Bidet Cleaning function. *The REAR BIDET refers the 1 water jet function of the nozzle. LADY BIDET/MOVE: Pressing this button will initiate the Static Lady Bidet Cleaning function. Press it again to change to the Back-&-Forth Lady Bidet Cleaning function. *The LADY BIDET refers the 4 water jets function of the nozzle.
CONTROLS DESCRIPTION SEAT TEMPERATURE: Pressing on this button will cycle through the 4 possible temperatures settings for the seat heating. 4 settings: Room temp / Low / Medium / High AIR TEMP: Pressing this button will cycle through the 4 possible temperatures settings for the air drying function. 4 settings: Room temp / Low / Medium / High LIGHT: Pressing this button will turn the toilet bowl’s light ON / OFF. STOP: Pressing this button will stop any ongoing function.
FEATURES REAR BIDET CLEANING (1 WATER JET) This function will only work if the user is sitting on the toilet. Press the REAR BIDET/ MOVE button for a rear bidet cleaning. Water will spray and clean the user. Press the button again and the nozzle will move back & forth to insure the cleanest result. You can use this key stoke to get the best cleaning effect. LADY BIDET CLEANING (4 JETS OF WATER) This function will only work if the user is sitting on the toilet.
INTELLIGENT FEATURES ECO MODE ECO MODE will cut down the electricity usage of your intelligent toilet during times of none-usage. The cleaning water tank will start heating the water only once the user is sitting on the toilet, whereas in normal mode, the cleaning water is kept to your preferences for your instant enjoyment. SOFT CLOSE DESIGN The toilet seat and seat cover have a soundless soft close design that prevents them from falling rapidly and denting or scratching the toilet.
CLEANING THE FILTER 1 Close the inlet valve, turn clockwise. Do not take out the filter before closing the inlet valve. 2 Unscrew the reducer from the Tee joint and take out the filter. Clean the filter. Use a tooth brush to clean the dirt on the filter. Use a cloth to clean the dirt and deposits in the reducer. 4 Install the filter back into the reducer. Screw the reducer back onto the Tee joint. Firmly tighten to avoid leakage. 3 Use water instead of detergent.
LONG TERM STORAGE In order to prevent from any damages that may be caused from frozen toilet water, please drain away the remaining water according to the following methods. When leaving for a long time without using this toilet, please make sure to drain all the water from the toilet. Preparation: 1. Close water inlet valve. 2. Turn off the power and unplug the power plug. Uninstallation: 1. Press in the mounting plate release button. 2. Pull out the seat. 3.
SPECIFICATION SHEET Item Electric Load Electric Cord Content AC 120V / 1300W / 60HZ 1.2 m insulated power cord Cleaning System REAR Bidet LADY Bidet Water Temp Heater Capacity Cleaning Tank Capacity Overheating Safety Anti-Reflux 1 jet 4 jets 4 settings: Room temp / LOW / MEDIUM / HIGH AC 120V / 1200W / 60HZ 500mL Temperature safety reset protector integrated. Toilet will shutdown if temp. is out of specs. Anti-Reflux check valve integrated.
MAINTENANCE & CONSUMER RESPONSIBILITIES ■■ The DISTRIBUTOR does prohibits the use of harsh abrasive cleansers on any of its products. Harsh cleansers will damage the inner workings of the toilets. ■■ For daily maintenance, use a wet cloth and a soft liquid cleaner. ■■ Never use abrasives or cleaners containing acetone, chlorine or strong bleach, scrapers, metallic brushes, nor other objects or products which can graze or tarnish surfaces.
INSTALLATION PICTURE p.
Save this manual for future reference Conservez ce manuel pour usage ultérieur Conserve este manual para futura referencia HEAD OFFICE / SIÈGE SOCIAL / OFICINA PRINCIPAL 2800 Etienne Lenoir, Laval Quebec H7R 0A3 Canada Customer service / Service à la clientèle / Service al cliente Tel.: 1-866-839-2888 Fax: 1-866-922-9990 8:00 am - 5:00 pm E.S.