Installation Guide

9
1. Level the track (B) and mark the track holes’ positions.
2. Remove the trackanddrillpilotholesinthemarkedlocationswithaΦ6mm(1/4in)drillbit.
3. Insertthewallanchors(FF)usingarubbermalletuntilthewallanchorsareushwiththewall.
4. Replace and secure the track (B) with screws (EE). Do not overtighten.
WALL TRACK INSTALLATION
FF
EE
2
30mm
1 3/16in
4
1
3
Base edge
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls
B
Φ6mm
1/4in