Installation Guide
p. 7
Reconnect the electrical cord. Make sure both ends are well aligned.
With care, re-install the seat on the ceramic base. Make
sure no wires get squeezed or tangled.
Using a ratchet, tightly screw the nut to the xing bolts.
Insert the ring gasket under the toilet.
Position the toilet on the oor drain, making sure the xing bolts are
aligned with the toilet’s holes.
Reconnect the water tube:
1) Gently, but rmly push the tube inside the hole.
2) Re-insert the blue clip.
2
1
5 6
7 8
9 10
INSTALLATION INSTRUCTIONS