Use and Care Manual

ovente.com

USING YOUR stand mixer

This device is designed for home use only.

Before placing the bowl, check that the device is

disconnected and the gear selector is in the "O"

position.

Please abide by the following instructions to achieve

the best results and to keep your appliance in good

working condition.

Press the button to open/close and then pull the top of

the robot.

Install the accessory (whisk or hook) on the axis of the

robot by engaging in the axis. Make sure they are in

place before turning on the power.

beater & kneader function

Pour ingredients into the bowl. - Install the bowl on the

base.

Press the button to open/close down the top of the

robot. NOTE: It is always possible to put the

ingredients in the bowl after installing it on the base.

Connect the unit and move the gear selector to the

desired speed. NOTE: There is a Bowl Blocking /

Unblocking function. It is used to make the bowl turn

while the ingredients are being mixed. Unlock the

bowl by positioning the lever to the left. Turn the bowl

by hand carefully for a few seconds. After a short time,

the bowl will rotate by itself, driven by the mixed

ingredients and the moving whips.

CAUTION: Do not put your hand in the bowl!! Risk of

serious injury.

first use