Use and Care Manual

ovente.com

using the vacuum

ASSEMBLING THE VACUUM

Fit the hose onto the vacuum cleaner by inserting the rotating

hose connection into the vacuum cleaner

until you hear a click. To remove the

hose, press the button at the side of

the hose connection, and then pull it out.

Fit the telescopic tube into the other end of

the hose.

Adjust the length of the telescopic tube by

pushing the locking mechanism down and

pulling in the bottom section of the tube to

a suitable length. When storing, shorten the

tube as far as possible.

Fit the floor brush into the telescope tube.

Floor Nozzle

The floor nozzle has two settings. When cleaning hard surfaces

(parquet flooring, flooring tiles, etc.), the nozzle brushes should

be extended. When cleaning carpetsand mats, the brushes

should be retracted into the nozzle. Press the brush change

button to switch between the two settings

Crevice and Bristle Brush

For radiators, corners, skirting boards, etc.

Furniture Nozzle

For furniture, curtains, drapes, etc

Before using the vacuum, first roll out a

sufficient length of the electric flex cable

and then plug it into the power outlet.