Operation Manual

5) optical frequency setting: 50HZ / 60HZ
6) Setting date: Press the ON / OFF to enter the setup
menu, press UP or DOWN key to select "Off" or
"Settings", press ON / OFF confirmation (confirmation
"Off" to exit the time setting, confirm the "Settings" to
enter the time setting interface); in the time setting
interface, press the UP key or DOWN key to change the
date and time parameters, press the ON / OFF button
to confirm and enter the next parameter set, when all
the setup is complete, press the ON / OFF button to
confirm and exit.
3. Download
1). USB cable to connect the computer and the machine.
2). Computer in the "My Computer" will appear in the
"Removable Disk."
3). The recorded file is stored in the memory card inside the
DCIM folder.
4. Note
1) Insert before using TF memory card.
2) In the video, please set the time before.
3) The recorder video recording mode for the cycle, when the
memory card capacity is full, the recorder will
automatically save the file from the initial start recording,
and overwrite the old file.
Note:
To avoid all the old files deleted in its entirety in the video, the
system default save file of 2 minutes, when the TF memory
card memory is full and rerecording, one by one the old file will
be overwritten) when the lithium battery is low , the recorder