Operation Manual

7.4 System setting
7.4.1 Basic setting
Get into the [Bacical] menu under [Configuration]
[System Time] set the HD record system time
Note:please click the”save” button to save the time after setting
[Daylight Saving Time (DST)] Enable the function and click “Set” to enter the local DST starting and ending
time setting.
[Date Format]Modify the date display format
[Date Separator]Select the separator for date
[Time Format] 24 hr or 12 hr display mode
[Time Zone]Select the time zone
[Language]Select language (different models have different language choice)
[Auto Logout]set menu stand-by time from 0-60 min. O min means no standby; if set a time, system will logout
auto after this period time and user need to login again.
[DVR No.]Used for a remote control or keyboard control multiple devices. Please click “Ad” button on remote
control and input the corresponding DVR number to operate.
[Video Standard]PAL/NTSC (must keep the same with the front-end camera)
[Startup Wizard] enable switch, open/close the startup wizard interface
[Device Name] used together with the push, display this device name in the alarm message received in iPhone.
[Channel mode]The selection of local channels and network channels.