Operation Manual

UNi-Link access
1. Press the "Input" button on the remote control or projector to enter
the signal selection menu:
2. Select the UNi-Link icon using the arrow keys and confirm your
selection by pressing "OK".
3. The following DLNA interface will appear on the screen:
IOS / DLNA device connection (iOS8 and iOS9 support):
Connect the projector to a wireless network. The projector will start to
forward the same network to the mobile device. In this mode, the projector
operates as a signal transmitter and does not interfere with the Wi-Fi
connection of the mobile device. The quality and strength of the signal
depends on the environment characteristics and quality of the Wi-Fi router.