Operation Manual

Step 3

After the flight,

move the controller's switch to "OFF" position (the power LED is off). Then, power off the

drone using the same method

- move the power switch located on the bottom of the drone to "OFF" position.

The lights will go off indicating that all the systems are

off.

6. FLIGHT CONTROL

Mode

Left / right

Throttle stick

Ascent / descent,

Rotate left / right

Fly forward / backward

Direction / rotation

control stick

Left

Right

360-degree stunts

When you press the Flip button the controller starts to beep indicating that the drone is in 3D flip mode.

When in 3D flip mode, move the direction stick forward, backward, left or right to flip the drone in the chosen

direction.

Speed modes

The device supports three flight speed modes. Press the flight speed button to switch between fast, medium

and slow mode. The number of beeps and the controller's LED inform about a currently chosen mode.

Headless mode

Place the drone on a flat surface. Turn on both the drone and the controller. Pair (synchronize) the drone and

the controller and turn on the headless mode. The controller beeps, the headless mode LED indicator starts to

glow and the lights of the drone start to blink.

In this mode, to make the operation of the drone easier, the forward flight direction is set regardless of the

drone position.