Operation Manual

LED Indicator
Green
light on
Red light
on
Charging Completed
Charging
Charger Specifications
Input
Charging Current
Full Voltage
110
-240V
9
00mA
8.45
± 0.03V
Battery usage and charge duration reference
Battery type
Battery
Specification
Usage Duration
Charge Time
Li
-poly battery
7.4V/9
00mAh
Helicopter flight time
up to
7 minutes
Approx.
90 minutes
Carbon
-Zinc
(Non Rechargeable)
1.5V
(GP 15G R4P)
Transmitter
operation
t
ime 18 Hours
Non Rechargeable
5.BINDING OF RADIO TRANSMITTER AND RECEIVER
Step1
Plug the attached battery to drone
. Place the aircraft on a flat surface (do not move the aircraft during the
binding process)to ensure the gyroscope is centered.
Step2
Turn the controller power button to the ON position. The LED light will flash. Wait 5 seconds and the bind has
been established.
Push the throttle stick from the lowest position to the highest position, and then back to the lowest position.
When the flashing light turns solid, the bind is complete.
Step3
After flying, turn the power switch on the transmitter to the OFF position(Power light
will turn off) and unplug
the battery
(Lights will turn off) indicating all systems are now powered OFF.
6.FLIGHT ADJUSTMENT AND SETTING
Mode
Mode
Left side/right side
Throttle
Ascent Descent
Forward / Backward
Rudder
Turn left
Turn right
3D FLIP Roll
When in 3D FLIP mode, move the direction stick left or right and quad will flip in whatever direction you want.