User's Manual

3.Installation/Un-installation

AirLive Air3GII User’s Manual

orking. The WAN fields may not be necessary for your connection. The

ation or service provider for additional information.

entered..

4. 3G Network: Select the 3G Network

5. APN: Enter the APN for your PC card here.(Optional)

6. Pin Code: Enter the Pin Code for your SIM card. (Optional)

7. Dial-Number: This field should not be altered except when required by your service

provider.

Account: Enter the new User Name for your PC card here, you can contact to your ISP

to get it. (Optional)

9. Password: Enter the new Password for your PC card here, you can contact to your ISP

to get it. (Optional)

10. Authentication: Choose your authentication.

11. Primary DNS: This feature allows you to assign a Primary DNS Server, contact to your

ISP to get it. (Optional)

12. Secondary DNS: This feature allows you to assign a Secondary DNS Server, you can

contact to your ISP to get it. (Optional)

13. Connection Control: Select your connection control. There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send outgoing

packets.

Auto Reconnect (Always-on): The device will link with ISP until the connection is

established.

Manually: The device will not make the link until someone clicks the

connect-button in the Status-page.

For 3G WAN Netw

information on this page will only be used when your service provider requires you to enter

a User Name and Password to connect with the 3G network.

Please refer to your document

1. Dial-Up Profile: Select “Auto-Detection” or “Manual” to continue. If “Auto-Detection” is

selected, the device will try to configure some ISP specific dial-up parameters

automatically according to the Country, Telecom, and 3G Network information you

2. Country: Select your country.

3. Telecom: Select your telecom.