User's Manual

3.Installation/Un-installation
AirLive Air3GII User’s Manual
23
the Ethernet
lly activate the WWAN connection
and k
Mean etected that the Ethernet WAN connection is recovered, your
broad
2. PPPo Password: The account and password your ISP assigned to you.
For s ord, leave it
blank
3. Connection Control: There are 3 modes to select:
: The device will link up with ISP when the clients send
outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.
4. Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE
session. Set it to zero or enable “Auto-reconnect” to disable this feature.
5. PPPoE Service Name: Optional. Input the service name if your ISP requires it.
Otherwise, leave it blank.
6. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default
MTU value is 0 (auto).
1. Activate WWAN for Auto-Failover: With this function enabled, when
WAN connection is broken, the device will automatica
eep you connected to internet with the alternative WWAN broadband service.
while, if the device d
band connection will be switched to use the Ethernet WAN service
E Account and
ecurity, this field appears blank. If you don't want to change the passw
.
Connect-on-demand