User's Manual

3.Installation/Un-installation

AirLive Air3GII User’s Manual

4. Gateway IP and Server IP Address/Name: The IP address of the PPTP server and

designated Gateway provided by your ISP.

5. PPTP Account and Password: The account and password your ISP assigned to you. If

you don't want to change the password, keep it blank.

6. Connection ID: Optional. Input the connection ID if your ISP requires it.

7. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to

zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is enabled,

this device will connect with ISP automatically after system is restarted or connection is

dropped.

8. Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send

outgoing packets.

Auto Reconnect (Always-on): The device will link with ISP until the connection is

established.

Manually: The device will not make the link until someone clicks the

connect-button in the Status-page.

9. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default

MTU value is 0 (auto).