User's Manual

4. Wireless Settings
4.4 Access Control
Wireless -> Access Control
The AC.TOP allows you to define a list of MAC addresses that are allowed or denied to
access the wireless network. This function is available only for Access Point and AP Router
modes. This function is available only for Access Point and Gateway modes.
 Disable: When selected, no MAC address filtering will be performed.

Allow list: When selected, data traffic from only the specified devices in the table
will be allowed in the network.

Reject list: When selected, data traffic from the devices specified in the table will
be denied/discarded by the network.
4.5 Site Survey
Wireless -> Site Survey
You can scan for wireless networks around your location using the Site Survey function.
From the site survey function, you can also perform antenna alignment and establish
wireless connection
When you click on Site Survey, the following screen will appear. It might take a while
depending on number of available APs in the area.
31 AirLive AC.TOP User’s Manual