User's Manual

4. Configuration: 3G Router Mode
AirLive Air3G User’s Manual
30
outdated; please select “others” as country and enter the information manually. Please
ask your service provider for the setup parameters if you are not sure what to enter.
 Service Name: The service name of service provider
 Dial Number: The AT dial command to connect with your 3G service
 PIN Code: The identification code required to access your 3G USB dongle
 Authentication: Check this box if your service provider require username and
password
 MTU Value: Maximum transmission unit. Please use default value unless your ISP
has special setting.
 Operation Mode
 Keep Alive: The 3G connection will auto reconnect if disconnection detect.
 On demand: The 3G connection will reconnect only if there is a request from
PC.
WAN Configurations
If you have xDSL or Cable Modem service, you can attach the internet connection to the
WAN port. Then configure the settings accordingly.
The Air3G supports different authentication and IP assignment standards for the WAN port.
It includes fixed IP, DHCP, PPPoE, PPTP, L2TP, and Big Pond protocols. Please consult
with your ISP about what authentication type is used for the WAN port connection.