User's Manual

6. AP Mode
63 AirLive Air3G User’s Manual

Disable: When selected, no MAC address filtering will be performed.

Allow list: When selected, data traffic from only the specified devices in the
table will be allowed in the network.

Deny list: When selected, data traffic from the devices specified in the table
will be denied/discarded by the network.
6.2.6 Associated Client
Wireless Settings -> Associated Client
You can check the wireless clients’ status on this table
 MAC Address: MAC address of the wireless clients. If you need to find the IP
address, please go to Status->Client Table menu.
 Power Saving: 0: The power saving mode is off. 1: The power saving mode is on.
 Modulation: Show the which MCS level is used in 11n mode
 Channel Width: This indicates whether client is using 20MHz or 40MHz channel
wdith.
 RSSI(dBm): The signal strength of the client device.
 Time(Sec): The connected time of the wireless client.
6.2.7 Advanced Settings
Wireless Settings -> Advance Settings
 Channel Width: You can choose 20MHz or 20/40MHz channel width. Choose
20MHz for compliance with laws in some countries. 40MHz offers faster performance
than 20MHz