User's Manual
Table Of Contents
- 1. Introduction
- 2. Installing the AirMax2
- 3. Configuring the AirMax2
- 4. Wireless Settings
- 5. Wireless Menu: Router Mode Settings
- 6. System Configurations
- 7. Device Status Menu
- 8. Bandwidth Control
- 9. Command Line Interface
- 10. Emergency Firmware Recovery
- 11. Frequent Asked Questions
- 12. Specifications
- 13. Wireless Network Glossary
1. Introduction
AirLive AIRMAX2 User’s Manual
6
1.4.7 WISP + Repeater Mode
This mode is the combination of WISP Router mode and AP mode. The radio is divided
into 2-way. One way is the client mode to connect with the remote AP, the other is the AP
mode to serve the local wireless network. There is a NAT router function to share the
Internet connection. Since the radio is divided by half, it is not recommended for long
distance application. The use of external Omni-Directional Antenna .
If you are a WISP operator, it is highly recommended that you use a 2-radio product like
AirLive G.DUO(dual 11g AP) or WLA-9000AP(A+G AP) for this purpose.