User's Manual

6. System Configurations
AirLive AIRMAX2 User’s Manual
58
 Upgrade Firmware:
To update the AIRMAX2 firmware, first download the firmware from AirLive web site to
your local disk. Then from the above screen enter the path and filename of the
firmware file (or click Browse to locate the firmware file). Next, Click the Upgrade
button to start.
Please make sure to check the “Keep Settings” box if you want the settings to be
kept after firmware upgrade.
The new firmware will be loaded to your AIRMAX2. After a message appears telling
you that the operation is completed, you need to reset the system to have the new
firmware take effect.
Do not power off the device while upgrading the firmware.
It is recommended that you do not upgrade your AIRMAX2 unless the
new firmware has new features you need or if it has a fix to a problem
that you’ve encountered.
6.8 Configuration Save and Restore
System Configuration -> Configuration Save and Restore
The AIRMAX2 can save and restore the settings to a file. In addition, it has the unique
capability to restore only the network or wireless settings. This makes changes of wireless
settings across the entire network of AP much easier.
You can save system configuration settings to a file, and later download it back to the
AIRMAX2 by following the steps.
Step 1 Select Configuration Save and Restore from the System Configurations menu.
Step 2 Click on “Save to” and Enter the path of the configuration file to save-to.
Restore Setting: