User's Manual
Table Of Contents
- 1. Introduction
- 2. Installing the AirMax2
- 3. Configuring the AirMax2
- 4. Wireless Settings
- 5. Wireless Menu: Router Mode Settings
- 6. System Configurations
- 7. Device Status Menu
- 8. Bandwidth Control
- 9. Command Line Interface
- 10. Emergency Firmware Recovery
- 11. Frequent Asked Questions
- 12. Specifications
- 13. Wireless Network Glossary
9. Command Line Interface
71 AirLive AIRMAX2 User’s Manual
In this chapter, we will explain commands that are available through Telnet or SSH
interface.
Before reading this chapter, please go through Section 3.3 of Chapter 3. It contains
information on how to login Telnet or SSH interface. For quick reference, the login and
password is as bellowed:
Telnet
Password: airlive
SSH
z Login: admin
z Password: airlive
9.1 Available Commands
[Mode] Wireless Mode
sys
operation <0:AP|1:Client|2:Bridge|3:
WDS Repeater|4:Universal
Repeater|5:WISP|6:WISP+U
niversal
Repeater|7:Gateway>
[Mode] Basic Settings
wlan
alias [string]
active [on|off]
chid [channel_id|auto]
essid [essid]
rssid [rssid]
band [b|g|bg]
mode
[client
<infrastructure|adhoc>]
clone [mac_addr|auto|manual]
encrypt [both|wlan|wan]
wds
peer
disp
add [mac]
delete [id]
clearall
encrypt [off]
wep [64|128] <ascii|hex>
9
9. Command Line
Interface