User's Manual
Table Of Contents
- 1. Introduction
- 2. Installing the AirMax2
- 3. Configuring the AirMax2
- 4. Wireless Settings
- 5. Wireless Menu: Router Mode Settings
- 6. System Configurations
- 7. Device Status Menu
- 8. Bandwidth Control
- 9. Command Line Interface
- 10. Emergency Firmware Recovery
- 11. Frequent Asked Questions
- 12. Specifications
- 13. Wireless Network Glossary
9. Command Line Interface
75 AirLive AIRMAX2 User’s Manual
<trig_from_port>
<trig_to_port>]
sap7 [on|off|clear|edit
<name> <in_proto>
<in_from_port>
<in_to_port>
<trig_proto>
<trig_from_port>
<trig_to_port>]
sap8 [on|off|clear|edit
<name> <in_proto>
<in_from_port>
<in_to_port>
<trig_proto>
<trig_from_port>
<trig_to_port>]
proto: 1. TCP+UDP, 2. TCP,
3. UDP
[Mode] Remote Management
sys
server access
web
<0:disabled|1:enabled>
port web <portnum>
access
telnet
<0:disabled|1:enabled>
[Mode] URL Filtering
ip
urlfilter
customize
disp
add [string]
delete [id]
clearall
[Mode] MAC Filtering
ip
macfilter
customize
disp
add [mac_addr]
delete [id]
clearall
[Mode] IP Filtering
ip
ipfilter
customize
disp
add [ip_addr]
<1:tcp+udp|2:tcp|3:udp>
delete [id]
clearall
[Mode] Traffic Control(Qos)
qos
disableif
enableif lanoutput [output rate]