User's Manual
Table Of Contents
- 1. Introduction
- 2. Installing the AirMax2
- 3. Configuring the AirMax2
- 4. Wireless Settings
- 5. Wireless Menu: Router Mode Settings
- 6. System Configurations
- 7. Device Status Menu
- 8. Bandwidth Control
- 9. Command Line Interface
- 10. Emergency Firmware Recovery
- 11. Frequent Asked Questions
- 12. Specifications
- 13. Wireless Network Glossary
10. Emergency Firmware Recovery
AirLive AIRMAX2 User’s Manual
80
Fig 1-2 : Press and hold the reset button while plugging in the power.
6. Open a browser; type “192.168.1.6” for the website address. The following screen
should show up
7. Click the “Browse” button, select and open the correct firmware file. Please go to
www.airlive.com to AIRMAX2’s support page and download.
8. Click on “UPGRADE” button. Do not touch the AP or PC until the upgrade is
completed.
9. Wait for AP to finish reboot. Open the web browser, and type “192.168.1.254”. You
should be able to login into the normal Web UI.