User's Manual

10. Device Status Menu
107 AirLive G.DUO User’s Manual
10.4 Client Table (ARP Table)
This table is also known as ARP table. It will show all wireless and wired device
connected to the G.DUO. If you want to look at the wireless clients only, you can go to the
“Wireless Settings” page in AP or Gateway mode for “Show Client” button.
10.5 Log
The log function is where you can check for error messages for diagnostic purpose.
 Enable Log: Check this box to enable log function.
 All: register all logs
 Wireless: register wireless log only
 DoS: register DoS attack log only
 Enable Remote Log: This will enable the Syslog function. All logs will be sent to the
Syslog server
 Log Server IP address: Enter the Syslog server IP address.