3. Making Configuration 3.3.5 Toolbox 3.3.5.
3. Making Configuration 3.3.5.2 Firmware Upgrade You can upgrade firmware by clicking Firmware Upgrade button. 3.3.5.3 Backup Setting You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. 3.3.5.4 Reset to default You can also reset this product to factory default by clicking the Reset to default button.
. Making Configuration 3.3.5.5 Reboot You can also reboot this product by clicking the Reboot button. 3.3.5.6 Miscellaneous Items MAC Address for Wake-on-LAN Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order to enjoy this feature, the target device must be Wake-on-LAN enabled and you have to know the MAC address of this device, say 00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to the target device immediately.
Appendices and Index Appendices and Index 802.1x Setting 1 Equipment Details Figure 1: Testing Environment (Use Windows 2000 Radius Server) PC1: Microsoft Windows XP Professional without Service Pack 1. AirLive WN-200USB Driver version: PC2: Microsoft Windows XP Professional with Service Pack 1a or latter. AirLive WN-200USB Driver version: 1.7.29.0 (Driver date: 10.20.2001) Authentication Server: Windows 2000 RADIUS server with Service Pack 3 and HotFix Q313664. Note.
Appendices and Index 2 DUT Configuration: Enable DHCP server. WAN setting: static IP address. LAN IP address: 192.168.1.254/24. Set RADIUS server IP. Set RADIUS server shared key. Configure WEP key and 802.1X setting. The following test will use the inbuilt 802.1X authentication method such as ,EAP_TLS, PEAP_CHAPv2(Windows XP with SP1 only), and PEAP_TLS(Windows XP with SP1 only) using the Smart Card or other Certificate of the Windows XP Professional. 3.
Appendices and Index 4. We will change EAP type to fit the variable test condition. Figure 2: Enable IEEE 802.1X access control Figure 3: Smart card or certificate properties 4. Windows 2000 RADIUS server Authentication testing: 4.1 DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.) Download and install the certificate on PC1. (Fig 4) PC1 choose the SSID of DUT as the Access Point. Set authentication type of wireless client and RADIUS server both to EAP_TLS.
Appendices and Index Terminate the test steps when PC1 get dynamic IP and PING remote host successfully.
Appendices and Index Figure 5: Authenticating Figure 6: Authentication success 4.2 DUT authenticate PC2 using PEAP-TLS. PC2 choose the SSID of DUT as the Access Point. Set authentication type of wireless client and RADIUS server both to PEAP_TLS. Disable the wireless connection and enable again. The DUT will send the user's certificate to the RADIUS server, and then send the message of authentication result to PC2.
Appendices and Index WPA Settings Wireless Router: LAN IP: 192.168.1.254 WAN IP: 192.168.122.216 Radius Server: 192.168.122.1 UserA : XP Wireless Card:Ti-11g Tool: Odyssey Client Manager Refer to: HHUwww.funk.comUHH Download: HHUhttp://www.funk.com/News&Events/ody_c_wpa_preview_pn.
Appendices and Index WPA: For this function, we need the server to authenticate. This function is like 802.1x. The above is our environment: Method 1: 1. The UserA or UserB have to get certificate from Radius, first. HHUhttp://192.168.122.1/certsrvU account : fae1 passwd : fae1 2. Then, Install this certificate and finish. 3.
Appendices and Index 4.
Appendices and Index Login name and passwd are fae1 and fae1. Remember that you get certificate from Radius in Step1. 5. Then Choose “certificate” like above.
Appendices and Index 6. Then go to Authentication and first Remove EAP/ TLS and Add EAP/TLS again.
Appendices and Index 7.
Appendices and Index 8. Back to Connection and Select “123kk. If successfully, the wireless client has to authenticate with Radius Server, like below: 9.
Appendices and Index Method 2: 1. The UserA or UserB have to get certificate from Radius,first. HHUhttp://192.168.122.1/certsrvU account:fae1 passwd:fae1 2. Then Install this certificate and finish. 3.
Appendices and Index Client: Go to “Network Connection” and select wireless adapter. Choose “View available Wireless Networks” like below: AdvancedÆ choose “123kk” Select “WirelessCA and Enable” in Trusted root certificate authority: Then, if the wireless client wants to associate, it has to request to authenticate.
FAQ and Troubleshooting FAQ and Troubleshooting What can I do when I have some trouble at the first time? 1. Why can I not configure the router even if the cable is plugged in the ports of Router and the led is also light? A: First, make sure that which port is plugged. If the cable is in the Wan port, please change to plug in Lan port 1 or Lan port 4: Then, please check if the Pc gets ip address from Router.
FAQ and Troubleshooting If yes, please execute Browser, like Mozilla and key 192.168.1.254 in address. If not, please ipconfig /release, then ipconfig /renew. Whatever I setup, the pc can not get ip. Please check Status Led and refer to the Q2: 2.Why can I not connect the router even if the cable is plugged in Lan port and the led is light? A: First, please check Status Led. If the device is normal, the led will blink per second. If not, please check How blinking Status led shows.
FAQ and Troubleshooting 4.Why can I not connect Internet even though the cables are plugged in Wan port and Lan port and the leds are blink. In addition, Status led is also normal and I can configure web management? A: Make sure that the network cable from DSL or Cable modem is plugged in Wan port of Router and that the network cable from Lan port of router is plugged in Ethernet adapter. Then, please check which wan type you use. If you are not sure, please call the isp.
FAQ and Troubleshooting How do I connect router by using wireless? 1.How to start to use wireless? A: First, make sure that you already installed wireless client device in your computer. Then check the Configuration of wireless router. The default is as below: About wireless client, you will see wireless icon: Then click and will see the ap list that wireless client can be accessed: If the client can not access your wireless router, please refresh network list again.
FAQ and Troubleshooting Choose the one that you will want to connect and Connect: If successfully, the computer will show and get ip from router: 88 AirLive GW-300R User’s Manual
FAQ and Troubleshooting 2.When I use AES encryption of WPA-PSK to connect even if I input the correct pre-share key? A: First, you must check if the driver of wireless client supports AES encryption. Please refer to the below: If SSID is default and click “Properties” to check if the driver of wireless client supports AES encryption.
FAQ and Troubleshooting 3. When I use wireless to connect the router, but I find the signal is very low even if I am close to the router? A: Please check if the wireless client is normal, first. If yes, please send the unit to the seller and verify what the problem is.
פ܅ሽंᘿ୴ࢤሽᖲጥᙄऄ ʳ รԼԲයʳ ীڤᎁᢞٽհפ܅୴᙮ሽᖲΔॺᆖױΔֆΕᇆࢨ ࠌ݁ृشլᖐ۞᧢ޓ᙮ΕףՕפࢨ᧢ޓૠհࢤ ֗פ౨Ζ รԼයʳ פ܅୴᙮ሽᖲհࠌشլᐙଆڜ٤֗եឫٽऄຏ ॾΙᆖ࿇ڶեឫွழΔᚨܛمೖشΔࠀޏ۟ྤեឫழ ֱᤉᥛࠌشΖ ছႈٽऄຏॾΔਐࠉሽॾऄࡳ܂ᄐհྤᒵሽຏॾΖ פ܅୴᙮ሽᖲႊٽ࠹ݴऄຏॾࢨՠᄐΕઝᖂ֗᠔᛭شሽं ᘿ୴ࢤሽᖲໂհեឫΖ ʳုѾΚᐗנڇᐗழΔᄎشܓຌ᧯᠙ࡳ᙮ሐΔᨃึጤࠌृشʳʳ ྤऄٚრᙇᖗ᙮ሐΖ ုѿΚڼข᙮ሐᙇᖗΔ̂̇̈˔ࠎ༼Ε˄Ε˅ˁ˄˄˄˄ଡ᙮ሐΖʳ
