User's Manual

Appendices and Index
AirLive GW-300R User’s Manual
72
4. We will change EAP type to fit the variable test condition.
Figure 2: Enable IEEE 802.1X access control
Figure 3: Smart card or certificate properties
4. Windows 2000 RADIUS server Authentication testing:
4.1 DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.)
Download and install the certificate on PC1. (Fig 4)
PC1 choose the SSID of DUT as the Access Point.
Set authentication type of wireless client and RADIUS server both to EAP_TLS.
Disable the wireless connection and enable again.
The DUT will send the user's certificate to the RADIUS server, and then
send the message of authentication result to PC1. (Fig 5)
Windows XP will prompt that the authentication process is success or fail
and end the authentication procedure. ( Fig 6)