User's Manual

3. Configuration

AirLive N450R User’s Manual

(b) Failover

With this function enabled, when the primary WAN connection is broken, the device will

automatically switch to secondary WAN connection and keep you connected to Internet.

Meanwhile, if the device detects that the primary WAN connection is recovered, your

Internet connection will be switched from secondary WAN back to primary WAN.

1. Combo WAN Mode

Choose Failover mode.

2. Remote Host for Keep Alive

Type an IP address or domain name of remote host to detect if Internet connection is

alive.

3. Primary WAN

The primary WAN is the WAN type you set at Internet Setup page.

4. Secondary WAN

Press “New Add” button to add the secondary WAN. If the primary WAN is 3G or

iBurst, then you can choose one of Static IP, Dynamic IP, and PPPoE as the secondary

WAN. However, 3G can be the secondary WAN if primary WAN is Static IP, Dynamic IP,

or PPPoE.