User's Manual

3. Configuration
AirLive N450R User’s Manual
76
DSCP marking
You can add your inbound / outbound packets a DCSP marking,
For example
Please mark CS3 when an packet in/ out via UDP port 5060.Once you saved the QoS rule,
system will show you the rule as below, you can add another new rule accordingly.
System will show you all your QoS rule as below
NOTE: You can move up or down the priority of all rules by pointing the ‘↑’or ’↓’ if you want
to change the priority.
NOTE: You can unmark any rule if you do not want it enable now.
Provide different priority to different users or data flows, or guarantee a certain level of
performance.