User's Manual

3. Configuration
AirLive N450R User’s Manual
83
3. Address auto configuration setting
Disable or enable this auto configuration setting. You may set stateless or stateful
( Dynamic IPv6), and also check if need to send Router advertisement messages
periodically.
(C) PPPoEv6
1. PPPoE settings
You need to type username and password of PPPoE connection. The service name
is only required when ISP asks you to input it. MTU is 1492 by default.
2. LAN IPv6 address settings
You can add LAN IPv6 address, and IPv6 Link-Local address will be showed
automatically.
3. Address auto configuration setting
Disable or enable this auto configuration setting. You may set stateless or stateful
( Dynamic IPv6), and also check if need to send Router advertisement messages
periodically.