User's Manual

3. Configuration
AirLive N450R User’s Manual
85
(E) IPv6 in IPv4 Tunnel
1. IPv6 address in IPv4 Tunnel settings
You may add remote / local IPv4 address and local IPv6 address, and then set DNS
address manually for Primary DNS address and secondary DNS address.
2. LAN IPv6 address settings
You can add LAN IPv6 address, and IPv6 Link-Local address will be showed
automatically.
3. Address auto configuration setting
Disable or enable this auto configuration setting. You may set stateless or stateful
(Dynamic IPv6), and also check if need to send Router advertisement messages
periodically.