User's Manual

1. Introduction
AirLive N.Plug User’s Manual
6
1.4.3 Bottom View
Hardware Radio switch, WAN/LAN1 port, LAN2 port and R-SMA Antenna Connector
WAN/LAN1 port
(Ethernet)
When the mode sets to AP mode and user can use standard LAN
cable (RJ-45 connector) to connect his/her PC with this port, it will
automatically function as an "Uplink" port
When the mode sets to Router mode, connect the ADSL or Cable
Modem here with RJ45 cable. If your modem came with a cable, use
the supplied cable, otherwise, use a standard LAN cable (RJ45
connectors).
When the mode sets to Repeater (Repeating Router), it will serve as
standard LAN port will shares the internet connection from Wireless.
LAN2 port
(Ethernet)
When the mode sets to Router mode and user can use standard
LAN cable (RJ-45 connector) to connect his/her PC with this port, it
will enable the device to share the internet connection from
WAN/LAN1.
Power ON/OFF
switch
User will able to turn on and off the N.Plug with this hardware switch.
R-SMA Antenna
Connector
User will connect the provided R-SMA antenna by screw the
antenna in a clockwise direction to the bottom panel of the device.