User's Manual

2. Operation Modes
AirLive N.Plug User’s Manual
7
2
2. Operation Modes
This device provides operational applications with Router, AP and Repeater modes, which
are mutually exclusive. This device is shipped with configuration that is functional right out
of the box. If you want to change the settings in order to perform more advanced
configuration or even change the mode of operation, you can manually switch to the mode
you desire by the manufacturer as described in the following sections. The default setting
mode is Repeater mode.
Switch Bar
2.1 Router Mode
When set to Router mode, ensure you are using the wireless LAN interface, connect the
Wireless Router with computer via radio frequency. In this mode, the device is supposed to
connect to internet via ADSL/Cable Modem or with 3G/3.5G USB dongle. Connect the
ADSL modem to the Ethernet port of the Wireless Router by Ethernet cable or Connect the
3G/3.5G USB dongle at the USB 2.0 Port. After connected successfully, user can login
the web page of the Wireless Router to set up the Internet connection by using PPPoE,
DHCP client, PPTP client , L2TP client or static IP.