User's Manual

2. Operation Modes
AirLive N.Plug User’s Manual
9
2.3.2 Repeating Router
For entering Repeating Router Mode, user needs to set the hardware switch to Repeater
first. Then user can access to the web user interface of N.Plug, either use the Wizard
function or just go to “Wireless Æ Basic” for selecting the Repeating Mode via the drop
down box.
If set to Repeater (Repeating Router) mode, In Repeating Router mode, the AP will
behave just the same as the Client mode for wireless function. However, Router functions
are added between the wireless WAN side and the Ethernet LAN side. Therefore, the ISP
Subscriber can share the Repeating Router connection without the need for extra router